Related Manuals for Sebo Automatic X1
Summary of Contents for Sebo Automatic X1
- Page 1 SEBO automatic Series For Household Use Only © Copyright SEBO America, LLC • All rights reserved.
-
Page 2: Table Of Contents
SEBO automatic X Series Owner’s Manual Technical Details Wiring Diagram Important Safety Instructions Special SEBO Product Features Automatic Power Head Height Adjustment Brush Roller Obstruction – Auto Shut-Off Brush Roller Deterioration Warning Stationary Use Warning Bag Full or Clog Warning – Auto Shut-Off... -
Page 3: Important Safety Instructions
When using an electrical appliance, basic precautions must always be followed. To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. -
Page 4: Special Sebo Product Features
Your SEBO X series vacuum cleaner is the most technically advanced upright vacuum cleaner in the world. Along with its excellent filtration system (99.9% to 0.3 microns), one of its most important features is its ability to “monitor” the resistance of the brush roller against the floor, so that the proper cleaning height is consistently maintained. -
Page 5: Identification Of Parts
1. Handle grip 2. On/Off switch 3. Handle assembly 4. Retaining ring 5. Cover release flap 6. Dust bag housing 7. Front cover 8. Housing release button 9. Power head with brush 10. Cable (cord) 11. Attachment tube handle Standard Attachments 17. -
Page 6: Operating Instructions
If damage occurs, stop using the vacuum cleaner immediately! The standard brush roller on your SEBO vacuum is appropriate for most types of floor surfaces. However, a soft-bristle brush roller (X4 part # 5010 GE or X5 part # 5290 GE) that is designed for use on sensitive looped-pile carpets and/or hard floors is available for an additional charge. -
Page 7: Using The Attachment Tube, Hose & Attachments
(6), and the power head is locked in a perpen- dicular position to the floor. To vacuum walls, under beds, or higher-reach areas, etc., the SEBO auto- matic can be fitted with an additional straight tube (45) and the wall and floor brush (41). -
Page 8: Maintenance
The sealing strip (39) is located just behind the brush roller opening. The sealing strip seals the power head to hard floors to prevent kick-back of debris while vacuum- ing. To replace a worn sealing strip, push the release but- ton, remove the side plate (36 and 37 in figure 10 &... -
Page 9: Clog Removal
Figure 14 Remove attachment hose (12) from vacuum cleaner (see figure 13) and remove front cover (7). Clean out connecting tube (23) and/or entrance to bag (28). Figure 15 Clogs in the swivel neck (20) can be removed by first pressing the housing release button (8) and lifting off the dust bag housing (6). -
Page 10: Trouble-Shooting Guide
Trouble-Shooting Guide Always unplug vacuum from outlet before dismantling any part of the machine! PROBLEM REASON Does not turn on 1. Handle not fully inserted into the bag or machine shuts off housing, causing a faulty connection. intermittently 2. Not plugged into good outlet. -
Page 11: Series Filter Bag Housing And Handle Schematic And Part Numbers
Cable hook (dark blue) 5764 DB Dust bag housing (dark blue) 5702 DB Dust bag housing bumper base (dark blue) 5763 DB Dust bag housing cpl. (dark blue / yellow) SEBO automatic Filter Bag Housing and Handle & Page 11... -
Page 12: X4 Base Schematic And Part Numbers
Wire tie 5402 Wire tie 0197 Screw M 4 x 12 5320 DG Chassis, cpl. 5468 Vacuum motor 1300 W / 120 V 05117 S Carbon brush set / vac mot. 5100 Rubber mounting 5462 Motor pulley 5129 Support lever... -
Page 13: X5 Base Schematic And Part Numbers
Wire tie 5402 Wire tie 0197 Screw M 4 x 12 5321 DG Chassis, cpl. 5468 Vacuum motor 1300 W / 120 V 05117 S Carbon brush set / vac mot. 5100 Rubber mounting 5462 Motor pulley 5129 Support lever... -
Page 14: Warranty
United States of America, please call SEBO America at (800) 334-6614. 5. To locate an authorized SEBO dealer or to register a warranty claim in Canada, please call Floor Care Equipment, Ltd. at (800) 661-8687.
Need help?
Do you have a question about the Automatic X1 and is the answer not in the manual?
Questions and answers
I have a sebo x1.1 serien-Nr T 051239 is it possible it to find the year of manufacture, have had this from new still going strong. many thanks