To contact SEBO in Canada: SEBO America, LLC Floor Care Equipment, Ltd. Telephone: (800) 334-6614 Telephone: (800) 661-8687 Fax: (303) 792-9196 Fax: (800) 270-4807 Website: www.sebo.us Website: www.sebocanada.ca For Warranty coverage information please refer to your Warranty Card included with your SEBO vacuum cleaner.
22. Use only original SEBO replacement parts. it to a SEBO service center. 23. Do not use vacuum as a step. 6. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp 24.
Many optional accessories are also becomes jammed in the brush roller. This available. The filter bag is also SEBO’s largest, with a dirt prevents the belt from breaking and pro- capacity of 1.4 gallons.
HEPA filters. Changing Bags is Easy and Clean – SEBO filter bags can be changed in just a few seconds, and a hygiene cap keeps dust sealed inside during removal and disposal.
To create a fresh scent while vacuuming, SEBO FRESH is avail- Another popular attachment is the hand-held Turbo brush for able. To use, deposit a scented stick in the filter bag.
Page 8
If damage occurs, stop using the vacuum cleaner immediately! The standard brush roller on your SEBO vacuum is appropriate for most types of floor surfaces. However, a soft-bristle brush roller (X4 part # 5010GE or X5 part # 5290GE) that is designed for use on sensitive looped-pile carpets and/or hard floors is available for an additional charge.
Page 9
For more information on the display panel, see pages 4 and 5. Boost Function - Figure 7a For high energy efficiency and deep cleaning of the carpet, the SEBO AUTO- MATIC X4 BOOST is equipped with a boost button (46). Press the button (46) by hand to activate the boost function.
To change the filter bag, pull the cover release flap for- ward (#5 on page 6) and lift the cover (7) from the bag housing. The cover release flap must remain in a forward SEBO Ultra “pulled-out” position to change filter bags and lock them Filter Bags into place.
CLOG REMOVAL Always unplug vacuum from outlet before removing any clogs! Clogs in the Airflow Pathway - Figure 15 Most clogs can be removed by accessing the airflow pathway via the orange colored access door (38) located on the underside of the power head. However, other clogs may only be removed by accessing the airflow pathway by disassembling the machine in the opposite sequence of the machine’s original assembly (see assembly, page 6).
TROUBLE-SHOOTING GUIDE Always unplug vacuum from outlet before dismantling any part of the machine! PROBLEM REASON SOLUTION Does not turn on 1. Handle not fully inserted into the bag 1. Release handle catch, push handle housing, causing a faulty connection. down, close handle catch.
Page 13
AUTOMATIC X4 | X5 SCHEMATIC AND PARTS LIST Bag Housing and Handle #9570AM X4 Arctic White/Gray #90504AM X4 BOOST Graphite #9501AM X4 Onyx/Silver #90505AM X4 BOOST Dark Red #9570AM X4, #9580AM X5 White/Gray and #9577AM X4 Blue/Yellow #90506AM X4 BOOST Arctic White...
AUTOMATIC X4 SCHEMATIC AND PARTS LIST Power Head #9570AM X4 Arctic White/Dark Gray #9558AM X4 Red/Gray #9501AM X4 Onyx/Silver #9577AM X4 Blue/Yellow #9570AM X4 Arctic White/Dark Gray Machine Pos. Part # Description 5781SE Power head cover, complete (incl. pos. 101-103,...
Page 15
AUTOMATIC X4 BOOST SCHEMATIC AND PARTS LIST Power Head #90504AM X4 BOOST Graphite #90505AM X4 BOOST Dark Red #90504AM X4 BOOST Graphite Machine #90506AM X4 BOOST Arctic White Pos. Part # Description 50799GS Power head cover, complete X4 BOOST - (incl.
Page 16
AUTOMATIC X5 SCHEMATIC AND PARTS LIST Power Head #9580AM X5 Arctic White/Gray #9587AM X5 Blue/Yellow #9580AM X5 Arctic White/Gray Machine Pos. Part # Description 5791SE Power head cover, complete - (incl. pos. 101-103, 165, 166, 169) - arctic white/gray black 5712WE Exhaust filter catch - white 5143...
Need help?
Do you have a question about the Automatic X4 and is the answer not in the manual?
Questions and answers
how to change belts on X4