Steps
1. Insert the power-button cable into the slot from the front-side of the computer, and press the power-button head until it
clicks into the place in the chassis.
2. Align and connect the power-button cable to the connector on the system board.
Next steps
1. Install the
front
bezel.
2. Install the
side
cover.
3. Follow the procedure in
Wireless antenna kit
Internal antenna kit
Removing the internal antenna kit
CAUTION:
The information in this section is intended for authorized service technicians only.
98
Removing and installing Field Replaceable Units (FRUs)
after working inside your
computer.