Steps
1. Slide the 3.5-inch hard-drive into the slot on the chassis.
2. Replace the EMI shield on the chassis.
3. Connect the data and power cables to the connectors on the hard drive.
Next steps
1. Install the
front
bezel.
2. Install the
side
cover.
3. Follow the procedure in
Optical drive
Removing the optical drive
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the optical drive and provide a visual representation of the removal procedure.
56
Removing and installing Customer Replaceable Units (CRUs)
after working inside your
before working inside your
computer.
computer.