Table 15. Media-card reader specifications (continued)
Description
NOTE:
The maximum capacity supported by the media-card reader varies depending on the standard of the media card
installed in your computer.
Power ratings
The following table lists the power rating specifications of OptiPlex Tower Plus 7010.
Table 16. Power ratings
Description
Type
Input voltage
Input frequency
Input current (maximum)
Output current (continuous)
Rated output voltage
Temperature range:
Operating
Storage
Power supply connector
The following table lists the Power supply connector specifications of your OptiPlex Tower Plus 7010.
Table 17. Power supply connector
Power supply unit
260 W (80 PLUS Bronze)
500 W (80 PLUS Platinum)
Values
Option one
260 W internal power supply unit (PSU),
85% Efficient, 80 Plus Bronze
90 VAC–264 VAC
47 Hz-63 Hz
4.2 A
● 12 VA/18 A
● 12 VB/15 A
Standby mode:
● 12 VA/1.5 A
● 12 VB/3.3 A
● +12 VA
● +12 VB
5°C-45°C (41°F-113°F)
-40°C-70°C (-40°F-158°F)
Power supply unit connectors
● Two 4 pin connectors for processor
● One 8 pin connector for system board
● Two 4 pin connectors for processor
● One 8 pin connector for system board
● One 6 pin and one 2 + 6 pin connectors for graphic card
Option two
500 W internal power supply unit (PSU),
92% Efficient, 80 Plus Platinum
90 VAC–264 VAC
47 Hz-63 Hz
7.0 A
● 12 VA/18 A
● 12 VB/18 A
● 12 VC/12 A
Standby mode:
● 12 VA/1.5 A
● 12 VB/3.3 A
● 12 VC/0 A
● +12 VA
● +12 VB
● +12 VC
5°C-45°C (41°F-113°F)
-40°C-70°C (-40°F-158°F)
Specifications of OptiPlex Tower Plus 7010
27