Appendix B: Beep Alarm - Samsung ES1642dc Hardware User Manual

Qnap enterprise-class
Table of Contents

Advertisement

Appendix B: Beep alarm

The beep alarm can be disabled in "Control Panel" > "System Settings" > "Hardware"> "Buzzer".
Beep
Times
Short beep
1
(0.5 Sec)
Short beep
2
(0.5 Sec)
Short beep
3
(0.5 Sec)
Short beep
3, every 5 min
(0.5 sec)
Long beep
2
(1.5 Sec)
1
Description
1) The ES NAS/SAN is starting up
2) The ES NAS/SAN is being shut down (software shutdown)
3) The user presses the reset button to reset the ES
NAS/SAN
4) The ES NAS is performing giveback.
The ES NAS is performing takeover.
The system firmware has been updated
1) The system fan is out of function
2) Heart beat lost connection
1) The disk volume is going to be full
2) The disk volume has reached its full capacity
3) The hard drives on the ES NAS/SAN are in degraded mode
4) BBU/power supply plug-out
5) JBOD lost
1) The ES NAS/SAN is turned off by force shutdown
(hardware shutdown)
2) The ES NAS/SAN has been turned on successfully and is
ready
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nas seriesEs1640dc

Table of Contents