Samsung SRN-470D User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Network Hardware
  5. iPOLIS SRN-470D
  6. User manual

Samsung SRN-470D User Manual

Hide thumbs Also See for SRN-470D:
Table of Contents

Advertisement

Quick Links

See also: User Manual
NETWORK VIDEO RECORDER

User Manual

SRN-470D/1670D

Advertisement

Table of Contents
loading

Related Manuals for Samsung SRN-470D

Summary of Contents for Samsung SRN-470D

  • Page 1: User Manual

    NETWORK VIDEO RECORDER User Manual SRN-470D/1670D...
  • Page 2 Warranty If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve the problem for free of charge. The warranty period is 3 years. However, the followings are excluded: •...

  • Page 3: Overview

    overview IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water.

  • Page 4: Before Start

    • SAMSUNG retains the copyright on this manual. • This manual cannot be copied without SAMSUNG's prior written approval. • We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this manual.

  • Page 5: Table Of Contents

    CONTENTS OVERVIEW Important Safety Instructions Before Start Features Part Names and Functions (Front) Part Names and Functions (Rear) Remote Control INSTALLATION Checking the installation environment Rack Installation HDD Addition CONNECTING WITH OTHER DEVICE Connecting to an external device Connecting the USB Connecting External eSATA HDD Connecting the Alarm Input/Output Connecting the Network...
  • Page 6 overview SEARCH & PLAY Search Playback WEB VIEWER Introducing Web Viewer Connecting Web Viewer Using Live Viewer Using Search Viewer Viewer Setup 104 About BACKUP VIEWER 105 SEC Backup Viewer APPENDIX 108 Product Specification 110 Product Overview 112 Default Setting 115 Troubleshooting 118 Open Source License Report on the Product 6_ overview...

  • Page 7: Features

    FEATURES With this NVR, you can record and play the video and audio signal from a network camera. Furthermore, you can transfer video and audio to an external device, which can be monitored by a remote PC. • User-friendly UI •...

  • Page 8: Package Contents

    Please unwrap the product, and place the product on a flat place or in the place to be installed. Please check the following contents are included in addition to the main unit. SRN-470D NETWORK VIDEO RECORDER SRN-470D ALARM NETWORK BACKUP...
  • Page 9 SRN-1670D ALARM ALARM NETWORK NETWORK BACKUP BACKUP DVD RECORDER NETWORK VIDEO RECORDER SRN-1670D DVD RECORDER OPEN/CLOSE OPEN/CLOSE SRN - 1670D NETWORK VIDEO RECORDER Remote Control / Mouse Remote Control Battery (AAA) Network Viewer Software / Power Cable User Manual User Manual CD Quick Guide SATA Cable HDD Fixing Screw...

  • Page 10: Part Names And Functions (Front)

    PART NAMES AND FUNCTIONS (FRONT) SRN-470D NETWORK VIDEO RECORDER SRN-470D ALARM NETWORK BACKUP DVD- DVD RECORDER SRN-1670D ALARM ALARM NETWORK NETWORK BACKUP BACKUP DVD RECORDER NETWORK VIDEO RECORDER SRN-1670D DVD RECORDER OPEN/CLOSE OPEN/CLOSE NETWORK VIDEO RECORDER SRN - 1670D...

  • Page 11: Part Names And Functions (Rear)

    Ports used for external storage device connections. NETWORK 1/2 NETWORK connector port. USB connector port. - ALARM IN : Alarm input ports. SRN-470D : 1~4 CH SRN-1670D : 1~16 CH - ALARM RESET : Alarm Reset port ALARM This is applicable only to SRN-1670D.

  • Page 12: Remote Control

    overview REMOTE CONTROL SEARCH BACKUP Displays the search menu. Displays the Backup Menu. OPEN/CLOSE Opens or closes the CD tray. MODE Changes the screen mode. DVR/NVR Activates the NVR function. POWER Displays the Exit pop up screen. NUMBER [0~ + 10] Used as the numeric input keys, or displays a single channel.

  • Page 13: Installation

    Life (Unit: HOURS) [Figure 1] The followings are the recommendations when Samsung NVR is installed on a rack. 1. Please ensure that the rack inside is not sealed. 2. Please ensure the air is circulated through the inlet/outlet as shown in the picture.

  • Page 14: Rack Installation

    Please consult your provider for further information on HDD installation since improper installation or settings may damage the product. Number of HDDs supported : SRN-470D : Up to 1 SRN-1670D : Up to 5 HDDs supported Make sure to unplug the power cord from the wall outlet before proceeding with the installation.
  • Page 15 If installing HDD to SRN-470D 1. First, loosen the screws on both sides and remove the cover. 2. Loosen the left and right screws on the lower hard disk bracket to remove it. 3. Insert the additional hard disk into the bracket and fix it using the provided screws.
  • Page 16 installation 4. Insert the bracket where the additional hard disk is inserted into the lower bracket and fix it using the provided screws. 5. When done, connect the power cable and connect the signal cable (SATA cable) to the connector for the main board.
  • Page 17 If installing HDDs to SRN-1670D 1. First, loosen the screws on both sides and remove the Cover cover. 2. Loosen the screws (x4) in the left/right and upper sides and remove the upper brackets. Upper Bracket Lower Bracket 3. Install HDDs (x2) on the lower bracket and fix them with screws.
  • Page 18 installation 5. When the installation of additional HDDs is done, insert the lower and upper brackets into the NVR and fix them with the provided screws. 6. When adding a HDD is completed, plug the power cable and connect the SATA cable (for transferring the HDD signal) to the connector of the main board.

  • Page 19: Connecting With Other Device

    CONNECTING TO AN EXTERNAL DEVICE SRN-470D AUDIO OUT VIDEO OUT (VGA) Power HDMI OUT eSATA HDD Mouse SRN-1670D AUDIO OUT VIDEO OUT (VGA) HDMI OUT Power eSATA HDD Mouse Unrated or improper power source may cause damage to the system. Ensure that you use only the rated power source before pressing the POWER button.

  • Page 20: Connecting The Usb

    Use a cable shorter than 1 m for the external eSATA HDD connections. The power for an external eSATA storage will be supplied separately. The external eSATA port is recommanded with only Samsung Techwin-manufactured external HDD (SVS-5R). 20_ connecting with other device...

  • Page 21: Connecting The Alarm Input/Output

    CONNECTING THE ALARM INPUT/OUTPUT The Alarm In/Out port at the back is composed of the following. SRN-470D Sensors Alarm • ALARM IN 1 ~ 4 : Alarm Input Port • ALARM OUT 1 ~ 2 : Alarm Output Port ALARM IN...
  • Page 22 connecting with other device SRN-1670D Alarm Sensors • ALARM IN 1 ~ 16 : Alarm Input Port • ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and resumes sensing. • ALARM OUT 1 ~ 4 : Alarm Output Port ALARM OUT ALARM IN ALARM IN...

  • Page 23: Connecting The Network

    CONNECTING THE NETWORK For more information about network connection, refer to "Network Configuration". (Page 68) Network connection via Ethernet (10/100/1000BaseT) Switch Switch Windows Network Viewer Network Camera Network Camera Network connection via router xDSL or Cable Modem NETWORK Brodband router Switch xDSL or Cable Modem...
  • Page 24 connecting with other device Connecting to Internet through ADSL NETWORK Phone(ADSL) Line ADSL MODEM Switch Switch Windows Network Viewer Network Camera Network Camera Connecting the network camera Switch Switch Network Camera ex) IP : 192.168.2.10 Network Camera ex) IP : 192.168.2.20 Network Camera ex) IP : 192.168.1.20 Network Camera...

  • Page 25: Live

    live GETTING STARTED Starting the system 1. Connect the power cable of the NVR to the wall outlet. 2. Press the Power button on the front panel. 3. You will see the initialization screen. The initialization process will last about 2 minute. If a new HDD is installed, the initialization process may take longer.
  • Page 26 live Login If you want to access a specific NVR menu or restricted menu, you must obtain the applicable permissions to do so. 1. In Live mode, right-click any area, or press [MENU] on the Scene Mode ► remote control. Camera profile Audio Off You will see the context menu on the screen as shown.

  • Page 27: Live Screen Configuration

    LIVE SCREEN CONFIGURATION Icons on the Live Screen You can check the status or operation of the NVR with the icons on the live screen. 2011-01-01 00:00:01 CAM 01 Name Description Current Date, Time Displays the current time and date. Login Information When you are logged in, the "LOG ON"...

  • Page 28: Error Information

    SRN-1670D : In 16/9-split Live mode, if the camera video is created in a high definition, no video will be displayed but this icon. SRN-470D : If the resolution of a camera video exceeds 1600x1200, the channel of the video source will be shown as HD.
  • Page 29 Live Screen Menu Besides the function buttons on the remote control, right-click any area in the Live screen, or press [MENU] on the remote control to display the context menu where you can access a desired menu item. The context menu differs depending on the state of Log in/out, split mode, and NVR operation status. Depending on the user permissions, you may have limited access to menu items of Live View, Backup, Stop Recording, Search, PTZ, Remote Alarm Output, and Exit.
  • Page 30 live Split Mode Menu In Live split mode, right-click to display this context menu as shown. The context sensitive menu in split mode differs, depending on the login/logout status. Scene Mode ► Camera Profile Audio Off Freeze Stop Alarm Record Play Search Backup...
  • Page 31 2. Move the cursor to the bottom and click a desired item in the Launcher menu. If no input is entered for 10 seconds, the menu will disappear. The Launcher menu can be accessed only by using the mouse. 2011-01-01 SRN-470D supports only: Single mode, 4-split mode, and Auto 01:10:25 Sequence. 2011-01-01 01:10:25...

  • Page 32: Live Screen Mode

    LIVE SCREEN MODE This product can display up to 16 channels in up to 6-split mode with the auto sequence feature. SRN-470D supports only: Single mode, 4-split mode, and Auto Sequence. Switching the screen mode To change the split mode, select a split mode in the launcher menu, or select one in the context menu of the Live screen.
  • Page 33 In Single mode, If you have set <Dwell Time> in "Setting the Device > Camera", Auto Sequence will be conducted at the set interval. (Page 56) In a split mode, If you have set <Multi CH SEQ Time> in "Setting the Device > Monitor", Auto Sequence will be conducted at the set interval.
  • Page 34 live Channel Setting You can display the channel in a desired area of a split screen. 1. Place the cursor over the camera name of each channel to display the <▼> key to the right on the screen. 2. Click a camera name to display a channel list where you can select a different channel. 3.

  • Page 35: Zoom

    ZOOM This is activated only in Live Single mode. If you zoom in the screen in Single mode, the selected channel will be enlarged in the original size; if zooming in again, the selected area will be enlarged as twice as the original size. 1.

  • Page 36: Audio On/Off

    live AUDIO ON/OFF You can turn the sound on/off corresponding to the channel in Live mode. AUDIO ON/OFF in Single mode Click the sound icon ( ) on the screen or press [AUDIO] on the remote control to turn on/off the sound. If you have configured the audio output settings properly but the audio or voice is not output, check if the connected network camera supports the sound signal and if you have configured the sound settings as appropriate.

  • Page 37: Event Monitoring

    EVENT MONITORING This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs. In "Monitor > Event Display", set the event monitoring to ON/OFF and specify the event display time. (Page 59) • If multiple events occur simultaneously, the screen will switch to a split mode. - 2~4 events : 4-split mode - 5~9 events : 9-split mode - 10~16 events : 16-split mode...

  • Page 38: Ptz Control

    Even if the connected network camera does not support the PTZ operations, you can configure the PTZ control settings (if possible) by installing the PTZ driver (physical device). This is available only with Samsung Techwin-manufactured PTZ network camera. 38_ live...
  • Page 39 Using the PTZ camera You can use a single PTZ camera to perform the Pan, Tilt and Zoom operations to monitor multiple places, and configure the custom settings of the presets in a desired mode. 1. Open the <PTZ Control> menu. The PTZ <...
  • Page 40 live Preset Preset is a specific position remembered by the PTZ camera. You can use the Preset function to define up to 20 presets for a single PTZ camera. 2011-01-01 01:10:25 ❖ To add a preset 1. Check the preset checkbox. 2.

  • Page 41: Menu Setup

    Menu Setup You can setup the system properties, devices, and options for recording, event, backup and network. SYSTEM SETUP You can setup Date/Time/Language, Permission, System Properties and Log. Date/Time/Language You can check and setup the current Date/Time and time related properties, as well as the language used for the interface on the screen.
  • Page 42 Menu Setup Setting Holiday You can set specific dates to Holidays according to your preferences. Holidays are applied to <Recording Schedule> and <Alarm Out Schedule> too. [MENU]  <System Configuration>  ►  <Date/Time/Language>  [ENTER]  ◄►  <Holiday> ...
  • Page 43 Permission Management You can set permissions of each user over the NVR's specific function and settings. Setting the Administrator You can set and change Administrator's ID and password. The administrator can use and set all menu items and functions. [MENU]  <System Configuration>  ►▼  <Permission Management>  [ENTER]  <Admin>  ▲▼◄►...
  • Page 44 Menu Setup Setting the Group You can create user groups and setup permissions for those user groups. You can register a user for each group in <User>. [MENU]  <System Configuration>  ►▼  <Permission Management>  [ENTER]  ◄►  <Group>...
  • Page 45 Setting the users You can add a user and edit information of a registered user. [MENU]  <System Configuration>  ►▼  <Permission Management>  [ENTER]  ◄►  <User>  ▲▼◄►  [ENTER] To register a user 1. Select a user group. You must first register a group where the user will belong to so that user can be registered.
  • Page 46 Menu Setup Setting Permissions You can set restricted access for all general users. Items with restrictions will require logging in for use. [MENU]  <System Configuration>  ►▼  <Permission Management>  [ENTER]  ◄►  <Setup>  ▲▼◄►  [ENTER] •...

  • Page 47: System Management

    To change the user password If you log in with the user account of a group with restricted access, you just can change your own password. 1. Provide the login information. 2. Select <User Menu>. The Permission Management screen appears. 3.
  • Page 48 Menu Setup To upgrade the current software version 1. Connect a device storing the software to be updated. It may take about 10 seconds to recognize the device. Upgradeable devices include USB memory, CD/DVD and network device. To update the network, the current NVR should have been connected to the network. Upgrade via the proxy server may not be enabled due to the restricted access.
  • Page 49 Settings You can copy and import the NVR settings by using a storage media. [MENU]  <System Configuration>  ►▼  <System Management>  ▼►  <Settings>  ▲▼◄►  [ENTER] • Storage Device : Shows the connected storage device. •...

  • Page 50: Log Information

    Menu Setup Log Information You can browse logs on the system and events. Checking the system log System Log shows log and timestamp on every system start up, system shutdown, and changes on system settings. [MENU]  <System Configuration>  ►▼  <Log Information>  [ENTER]  <System Log>  ▲▼◄►...
  • Page 51 • Search : Specify the date and press this button to display the search result in the log list. • Type : When there are too many logs, you can display logs of the desired format by selecting the type. Checking the backup log You can find out who backed up and the details (backup time, channel, device to use, file format, etc.).

  • Page 52: Setting The Device

    Menu Setup SETTING THE DEVICE You can setup Camera, Storage Device, Remote Device and Monitor. Camera To register a camera You can register a network camera for each channel and make connection between. [MENU]  ▲▼  <Device>  ►  <Camera>  [ENTER]  ▲▼◄►  [ENTER] •...
  • Page 53 • Model : Select a camera model. - SVNP : Indicate a network camera that complies with SVNP protocols of Samsung Techwin. If you want to connect a camera that is not displayed in the camera list, select a SVNP model name.
  • Page 54 Menu Setup 5. If you select <RTSP> for the protocol, check options as necessary. • RTSP URL : For more information about the RTSP address, refer to the manual of each applicable network camera. • ID : Enter the ID with which you connect to RTSP. •...

  • Page 55: Camera Setting

    Camera Setting You can change the video settings of a registered network camera for each channel. • Profile : Show a video profile for the connected camera. • Codec : Show the codec information for the selected profile. • Resolution : You can change the resolution of the selected profile. •...
  • Page 56 Menu Setup • Audio - If set to <ON>, you can turn the audio of the channel ON/OFF on the Live screen. - If set to <OFF>, the channel's audio is off on the Live screen and not recorded. • Camera Name : Provide a camera Name. You can enter up to 15 characters including space.
  • Page 57 • Alarm - Alarm signal will output through the alarm out port on the rear side when selected <1>, <2>, <3>, and <4>. SRN-470D supports only alarms : <1> and <2>. - If <BEEP> was selected, a beep will sound.
  • Page 58 • Duration : Sets the alarm duration for the alarm signal and beep sound. - Check Alarm, Replace Alarm signals will output through the selected alarm out ports (1, 2, 3, and 4). SRN-470D supports only alarms : <1> and <2>. - If <BEEP> was selected, a beep will sound.

  • Page 59: Monitor Settings

    Monitor You can set the information displayed on the monitor as well as the output system. Monitor settings You can configure the monitor output-related settings including the displayed information, dwell time and output system. [MENU]  ▼  <Device>  ►▼  <Monitor>  [ENTER]  ▲▼◄►  [ENTER] •...
  • Page 60 Menu Setup To adjust the display position Some monitors many not display information (camera name, icon, time information, etc.) about the NVR, depending on the condition. Then, you can change the display position of the data. 1. From the monitor setup menu, select <Display Position Setup>. 2.

  • Page 61: Setting The Recording

    SETTING THE RECORDING You can setup scheduled recording, event recording and other recording related settings. Recording Schedule Make your reservation on a date and time to schedule the recording on specified time. [MENU]  ▼  <Record>  ►  <Recording Schedule>  [ENTER]  ▲▼◄►  [ENTER] •...

  • Page 62: Record Setting

    Menu Setup Event Record Duration You can set the beginning and ending point of a recording on an event. [MENU]  ▼  <Record>  ►▼  <Event Record Duration>  [ENTER]  ▲▼◄►  [ENTER] • Pre Event : The recording of an event will start at a pre-determined time prior to the actual occurrence of the event. If it is set to 5 seconds, the recording begins from 5 seconds before the event.
  • Page 63 If the entire size of recording data exceeds 64 Mbps, the product will make recording only on key frames <Key Frame> even if you have set <Full Frame> as this may affect other operations. If you intend to record only key frames, the limited record icon will be displayed on the top of the Live screen. If you press [ALARM], the limited record icon will disappear.
  • Page 64 Menu Setup Record Option You can set the recording to stop or overwrite when the HDD is full. [MENU]  ▼  <Record>  ►▼  <Record Option>  [ENTER]  ▲▼◄►  [ENTER] • Disk End Mode : Select a HDD repetitive recording type. - Overwrite : If the HDD is full, this will overwrite the existing data and keep recording.

  • Page 65: Setting The Event

    • Alarm out : Sets the alarm output method. For further information on alarm output, refer to "HDD Alarm > Alarm". (Page 57) SRN-470D supports only alarms <1> and <2>. • Duration : Sets the duration of alarm signal and alarm sound.
  • Page 66 Menu Setup Motion Detection/Video Analysis Event You can set target detection region and motion, as well as the alarm signal output. [MENU]  ▼  <Event>  ►  <Motion Detection/Video Analysis Event>  [ENTER]  ▲▼◄►  [ENTER] • Mode : Sets whether to activate motion detection. In Camera Setup, you should specify each of the motion detection area and sensitivity separately.

  • Page 67: Backup

    • Type : Sets the backup data format. - NVR : Saved data can be played back only by the NVR. - SEC : Saves data in the Samsung's proprietary format with built-in viewer, which supports immediate playback on a PC.

  • Page 68: Network Configuration

    Menu Setup NETWORK CONFIGURATION It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with events. You can configure the network environment which enables such functions. Connection Mode You can set the network connection route and protocol. Network 1/Network 2 connection settings Sets the protocol and environment of the network.
  • Page 69 Connecting and Setting the Network Networking may differ from the connection method, check your environment before setting the connection mode. When no router is used • Static IP mode - Internet connection : Static IP ADSL, leased line, and LAN environments allows connection between the NVR and remote user.
  • Page 70 Menu Setup When a router is used To avoid IP address conflict with the NVR's static IP, check followings : • Setting the NVR with a static IP - Internet connection : You can connect the NVR to a router which is connected to an ADSL/Cable modem or a router in a Local Area Network (LAN) environment.

  • Page 71: Advanced Setting

    Advanced Setting [MENU]  ▼  <Network>  ►  <Connection Mode>  [ENTER]  ▲▼◄►  <Advanced>  ▲▼◄►  [ENTER] • Protocol Type : Select the protocol type between TCP and UDP. If you select UDP, the items of Port(UDP) and Unicast/Multicast will be active. If set it to TCP, the Port (TCP) item will be active.

  • Page 72: Ddns Setting

    Menu Setup DDNS You can set the DDNS site for a remote user's network connection. [MENU]  ▼  <Network>  ►▼  <DDNS>  [ENTER]  ▲▼◄► [ENTER] • DDNS Site : Specify the use of DDNS and select a site that you registered. •...
  • Page 73 Live Transfer Setting You can configure the profile to transfer the live video of each channel via the network. • Profile : Select a network profile for the connected camera. • Codec : Show the codec information for the selected network profile. •...

  • Page 74: Event Setting

    Menu Setup • Port : Sets the communication port. • Use Authentication : Check this if the SMTP server uses user authentication. The account input box will be activated. • User : Enter a user to use authentication when connecting to the SMTP server. •...
  • Page 75 Group Setting You can set the group to whom the e-mail is sent, and specify the permission for each group. Apart from the NVR user group, you can add email recipients from the <Recipient> item. [MENU]  ▼  <Network>  ►▼ <Mailing Service>  [ENTER]  ▲▼◄►  <Group>  ▲▼◄►...

  • Page 76: Search

    search & play SEARCH You can perform the search for recorded data by the time or by the search criteria such as an event. You can access the <Search> menu directly in Live mode. Scene Mode ► Camera Profile Audio Off Freeze Stop Alarm Record...

  • Page 77: Event Search

    3. The record data on the specific date will be listed. The display bar is different according to the data type. So check the data type for the color in the left pane. 4. Use direction buttons (▲▼◄►) to set the search criteria and press the [ENTER] button. •...
  • Page 78 search & play Backup Search Searches for backup data in the connected backup device. Only data in the format of NVR is included in the search. Refer to <Type> in "Backup > Backup". (Page 67) 1. Select <Backup Search> in the <Search> menu. 2.

  • Page 79: Playback

    PLAYBACK Play You can play data stored in the HDD and backup a desired portion of the data. Scene Mode ► Camera Profile Audio Off Freeze Stop Alarm Record Play Search Backup Main Menu Shutdown Hide Launcher Logout 2011-01-01 Alarm Freeze 01:10:25 Alarm...
  • Page 80 search & play Using the Playback Button Name Description Play Timeline Indicates the current playback point, and can be used to move. Skip Backward Moves backward by unit time. Backward Fast Used for quick backward search while in Play. Play Backward Slow Play Used for backward frame-by-frame search while in PAUSE.

  • Page 81: Introducing Web Viewer

    web viewer INTRODUCING WEB VIEWER What is Web Viewer? Web Viewer allows remote access to your NVR(Network Video Recorder). You have access to live video, archived video, PTZ control (if configured), etc. Product Features • Remote connection using the browser •...

  • Page 82: Connecting Web Viewer

    web viewer CONNECTING WEB VIEWER 1. Open your web browser and type the IP address or URL of NVR into the URL address box. You must have specified the IP address in “Network > Connection Mode”. The URL connection will be enabled only when the DDNS connection settings have been completed. For more information, refer to “Network Configuration >...

  • Page 83: Using Live Viewer

    USING LIVE VIEWER The Live Viewer screen consists of following : This displays the IP address and the model name of the connected NVR. These menus consist of <LIVE>, <SEARCH>, <SETUP>, <ABOUT>. Select a split mode or full screen mode. Shows the IP address and model name of the connected NVR.
  • Page 84 web viewer OSD Information Display The channel number, video size, and IP address of the connected NVR are displayed. The current date and time will be displayed according to the selected time information display setting <NVR Time> or <PC Time> Alarm icon appears when alarm is issued.
  • Page 85 Connected NVR This displays the IP address and the status of the connecting NVR. Connection failure message No Response : Appears when the NVR does not respond. Access Denied : Appears when the maximum number of users is exceeded. The number of simultaneous connections are limited to 10. Audio Sound On/Off.
  • Page 86 Saving the Live Screen on the PC • CAPTURE : Saves the current screen into a BMP or JPEG file. The default saving path is “C:\Program Files\Samsung\NVR Web Viewer\SnapShot\Live”. To change the saving path, click <SAVE PATH ( )> button and then select the path you want.
  • Page 87 • RECORD : Saves the current image on the screen and saves it as a avi video file. To record it, it is required at least 1GB of available space. The default saving path is “C:\Program Files\Samsung\NVR Web Viewer\VideoClip\Live”. To change the saving path, click <SAVE PATH ( )>...
  • Page 88 web viewer • MENU : Appears the camera menu screen. • Preset : Moves the lens direction to a preset direction. 1. If you click a preset, the camera moves to the selected preset's position. 2. You can delete the selected preset or all presets. 3.

  • Page 89: Using Search Viewer

    USING SEARCH VIEWER The Search Viewer screen consists of following : This displays the IP address and the model name of the connected NVR. These menus consist of <LIVE>, <SEARCH>, <SETUP>, <ABOUT>. These buttons are used for the screen split and full screen mode. Shows the IP address and model name of the connected NVR.
  • Page 90 web viewer Split-Screen You can change the split mode by clicking each number icon. <SINGLE MODE> <QUAD MODE> • Click < > button. The screen displays the selected camera connected to the NVR in “SINGLE MODE”. • Click < > button. The screen displays the selected camera connected to the NVR in “QUAD MODE”.
  • Page 91 PC.) To stop recording, click this button again. To record it, it is required at least 1GB of available space. The default saving path is “C:\Program Files\Samsung\NVR Web Viewer\VideoClip\Search”. To change the saving path, click <SAVE PATH ( )>...
  • Page 92 web viewer Searching the Recorded Video in the Calendar If the video data has been recorded on a date, the date is distinguished in green. If you click the date, the recorded video information is displayed in the time line. Click <Today> to change the date to today.
  • Page 93 Controlling Playback Fast Backward : Reverse-plays faster. Each time you press the button, the play speed will switch to: x2, x4, x6, x8, x16, x32 and x64. Reverse Play : Performs Reverse Play. Play : Performs playback. Fast Forward : Plays faster. Each time you press the button, the play speed will switch to: x2, x4, x6, x8, x16, x32 and x64.

  • Page 94: Viewer Setup

    web viewer VIEWER SETUP You can configure the NVR settings remotely on the network. To configure the NVR settings, click <Setup>. System You can configure the various settings of the NVR system. Date/Time/Language For more information, refer to “Date/Time/Language” in the “System Setup” menu. (Page 41) Date/Time Set the date and time.
  • Page 95 Holiday You can set specific dates to Holidays according to your preferences. For more information, refer to “Setting Holiday” in the “System Setup” menu. (Page 42) Permission Management For more information, refer to <Permission Management> in the “System Setup” menu. (Page 43 ) Admin You can change the admin ID or the password.
  • Page 96 web viewer Setup You can set the user permission. System Management For more information, refer to <System Management> in the “System Setup” menu. (Page 47) System Information You can see information of the current system. Check the software version and MAC address. Device You can check a list of devices that are connected to the NVR and configure the necessary settings.
  • Page 97 Camera Setup You can change the settings of a connected network camera. Channel Setup You can configure the video settings for each channel. Storage Device You can check and change the settings related to the data storage device. Device You will see a list of storage devices that are connected to the NVR.

  • Page 98: Remote Device

    web viewer Remote Device You can specify the ID of a remote control that will operate in sync with NVR. Monitor Monitor You can configure the monitoring screen settings and set the output system. If the video is not played properly, refer to the troubleshooting section later in this manual.

  • Page 99: Record Setup

    Record For more information, refer to “Setting the Recording”. (Page 61) Recording Schedule If you set a recording schedule for a specific date and time, the recording will start at that specific time. Event Record Duration You can set the start and end times of recording that will be activated if an event occurs.
  • Page 100 web viewer Network Camera You can configure the record-related settings of the network camera. Record Option You can set the Disk End Mode. 100_ web viewer...
  • Page 101 Event For more information, refer to “Setting the Event”. (Page 65) Sensor Detection NVR/Network Camera You can set the sensor operation mode and the synchronized camera as well as the alarm output type and the duration. If the connected network camera that has configured the alarm in/out settings triggers an alarm, NVR will perform the alarm out.
  • Page 102 web viewer Network For more information, refer to “Network Configuration”. (Page 68) Connection Mode A remote user can access the NVR via the network to check the current mode and the IP address. Network 1/2 Specify the network connection path. Advanced You can configure the protocol related settings.
  • Page 103 Live Transfer You can configure the network transfer settings of the network camera. Mailing Service You can specify the SMTP server that sends a mail if an event occurs and set the recipient group and users. SMTP You can set the server that sends mails and specify if you use the authentication process.

  • Page 104: About

    web viewer Recipient You can add a user or users who will receive the mail. ABOUT Click <ABOUT>. Displays the model name of connected NVR and the version of Web Viewer. 104_ web viewer...

  • Page 105: Sec Backup Viewer

    backup viewer SEC BACKUP VIEWER You can play a file that is backed up in the format of SEC. Backup in the format of SEC will involve in generating two files: one for the backup data and one for the viewer. If you run the backup file viewer, the backup data file will be automatically played.
  • Page 106 backup viewer Name Description A toggle button. Each time you press this button, the audio output will toggle between activated and deactivated. Audio You can adjust the volume level from 0 to 100. Saves the current screen as an image file. Supported file formats include BMP and JPEG.
  • Page 107 ❖ Speed difference according to the resolution • XGA(1024X768) or lower - 30fps ~ 20fps: x2 forward/backward - 20fps ~ 10fps: x4 forward/backward - 10fps ~ 5fps: x8 forward/backward - Less than 5fps: x16 forward/backward • 0.9M(1280X720 : 720p) ~ 1.3M(1280X1024 : SXGA) - 30fps ~ 25fps: x1 forward/backward - 25fps ~ 20fps: x2 forward/backward - 20fps ~ 10fps: x4 forward/backward...

  • Page 108: Product Specification

    PRODUCT SPECIFICATION Item Details Model SRN-470D SRN-1670D Video In Max. 4CH Max. 16CH Video Out VGA(1)/ HDMI(1) VGA(1)/ HDMI(1) Compression H.264, MJPEG, MPEG-4 H.264, MJPEG, MPEG-4 Speed 120fps, 4CIF(704x480) 240fps, 4CIF(704x480) Split Mode 1/4/Auto Sequence 1/4/6/8/9/13/16/Auto Sequence Display VGA(1024x768/1280x1024(60Hz)/...
  • Page 109 Item Details Model SRN-470D SRN-1670D Interface RJ-45, Gigabit Ethernet x 2 RJ-45, Gigabit Ethernet x 2 TCP/IP, DHCP, PPPoE, SMTP, NTP, HTTP, TCP/IP, DHCP, PPPoE, SMTP, NTP, HTTP, Protocols DDNS, RTP, RTSP DDNS, RTP, RTSP Program NET-i Viewer, Webviewer NET-i Viewer, Webviewer...

  • Page 110: Product Overview

    PRODUCT OVERVIEW • SRN-470D unit : mm (inches) DVD- DVD RECORDER 215.0 (8.46) 110_ appendix...
  • Page 111 • SRN-1670D unit : mm (inches) 440(17.32”) NETWORK VIDEO RECORDER SRN-1670D English _111...

  • Page 112: Default Setting

    appendix DEFAULT SETTING This returns the factory default settings. To reset the system, move to “System Management > Settings > Load Factory Default” and press the <Default> button. The default settings are based on SRN-1670D. The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
  • Page 113 Category Details Factory Default Recording Schedule Event Pre Event Event Record Duration POST Event 1 min Standard REC Rate Key Frame Record Record Setup Event REC Rate Full Frame Overwrite Disk End Mode Record Option Disk End Beep Auto Delete Sensor Operation Camera No.
  • Page 114 appendix Category Details Factory Default Address Type Static IP Bandwidth Unlimited Static IP 192.168.1. 200 Network1 Gateway 192.168.1.1 Subnet Mask 255.255.255.0 168.126.63.1 Address Type Static IP Bandwidth Unlimited Static IP 192.168.2. 200 Network2 Connection Mode Gateway 192.168.2.1 Subnet Mask 255.255.255.0 168.126.63.1 Protocol Type Port (TCP)

  • Page 115: Troubleshooting

    TROUBLESHOOTING Problem Action  Check if the power supply system is properly connected. The system does not turn on and the indicator on the  Check the system for the input voltage from the power source. front panel does not work at all. ...
  • Page 116 appendix Problem Action  Check the registered Camera if it support PTZ function. No response controlling PTZ in the live viewer  Check if the network cable is connected properly. The camera is not connected or the PC fails to connect ...
  • Page 117 Problem Action  Contact the NVR administrator for help. I forgot the password.  When you are backing up data, you have choices about the player either: PC Backup data is just not played by the PC or NVR. or NVR. Make your selection before proceeding. ...

  • Page 118: Open Source License Report On The Product

    Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
  • Page 119 3. You may copy and distribute the Program (or a work based on it, This section is intended to make thoroughly clear what is believed to be under Section 2) in object code or executable form under the terms of a consequence of the rest of this License.

  • Page 120: Gnu General Public License

    For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For both users' and authors' This program is distributed in the hope that it will be useful, but sake, the GPL requires that modified versions be marked as changed, so WITHOUT ANY WARRANTY;...
  • Page 121 A “Standard Interface” means an interface that either is an official 4. Conveying Verbatim Copies. standard defined by a recognized standards body, or, in the case of You may convey verbatim copies of the Program's source code as you interfaces specified for a particular programming language, one that is receive it, in any medium, provided that you conspicuously and widely used among developers working in that language.
  • Page 122 d) Convey the object code by offering access from a designated When you convey a copy of a covered work, you may at your option place (gratis or for a charge), and offer equivalent access to the remove any additional permissions from that copy, or from any part of it. Corresponding Source in the same way through the same place (Additional permissions may be written to require their own removal in at no further charge.
  • Page 123 9. Acceptance Not Required for Having Copies. If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, You are not required to accept this License in order to receive or run a and grant a patent license to some of the parties receiving the covered copy of the Program.
  • Page 124 15. Disclaimer of Warranty. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT to copy, distribute and/or modify the library. PERMITTED BY APPLICABLE LAW.
  • Page 125 Activities other than copying, distribution and modification are not If distribution of object code is made by offering access to copy from a covered by this License; they are outside its scope. The act of running a designated place, then offering equivalent access to copy the source program using the Library is not restricted, and output from such a code from the same place satisfies the requirement to distribute the program is covered only if its contents constitute a work based on the...
  • Page 126 For an executable, the required form of the “work that uses the This section is intended to make thoroughly clear what is believed to be a Library” must include any data and utility programs needed for consequence of the rest of this License. reproducing the executable from it.
  • Page 127 Copyright (C) year name of author Original SSLeay License Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights This library is free software; you can redistribute it and/or modify it under reserved. This package is an SSL implementation written by Eric Young the terms of the GNU Lesser General Public License as published by the (eay@cryptsoft.com).
  • Page 131 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
  • Page 132 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungcctvusa.com...

This manual is also suitable for:

Srn-1670d

Table of Contents