Initial Settings; Recording Setup; Preparations; Setting "Record Mode - Sanyo DVR-500 Instruction Manual

Recording Setup

This is a setup for recording on a DVD+RW or DVD+R disc.

Preparations

(Recording Setup ---> Record Mode & Auto Chapter)
1. Select "Setup Menu" in "Menu" screen. See page E22.
Play/Edit Disc Recording Setup
Record Program DVD Control
4
a
Setup Menu General
Video
Audio
AV Select
Press SETUP to exit
2. Press [ENTER] (or [a]).
"Recording Setup" is highlighted.
3. Press [ENTER] (or [a]) again.
"Recording Setup" screen appears.
Recording Setup
a
Record Mode HQ
5
Auto Chapter SP
Set Clock LP
Channel Setup EP
EP+
Press SETUP to exit Current selection
4. Press [o] or [p] to select the item.
Record Mode ===> See the right column.
Auto Chapter ===> See page E24.
Set Clock ===> See page E18.
Channel Setup ===> See page E19.
4, 5, a, b

INITIAL SETTINGS

Menu
ENTER
-E23-

Setting "Record Mode"

1. Select "Record Mode".
Recording Setup
a
Record Mode HQ
5
Auto Chapter SP
Set Clock LP
Channel Setup EP
EP+
Press SETUP to exit Current selection
2. Press [ENTER] (or [a]) to select the sub menu.
Recording Setup
Record Mode HQ
b
Auto Chapter SP
Set Clock LP
Channel Setup EP
EP+
Press SETUP to exit Current selection
3. Press [p] or [o] to select the desired record mode.
Record mode
HQ:
SP (Standard mode):
LP:
EP:
EP+:
Please note the following:
• The record times are an estimate and actual times may
differ.
• The record time may differ depending on the recording
conditions.
- Recording a program with poor reception, or a program
or video source of low picture quality
- Recording on a disc that has already been edited
- Recording only a still picture or just sound
4. Press [ENTER].
"√" appears.
The record mode is set.
5. Press [b] to return to "Record Mode".
Need help? Call
1-800-813-3435
4
5
Record time (minutes)
60
120
180
240
360