Sanyo DVR-500 Instruction Manual page 21

Auto CH Scan
1) Select "Auto CH Scan".
Recording Setup
Record Mode
b
Auto Chapter Auto CH Scan
Set Clock Channel List
Channel Setup Modify Channel
Tuner Select
MTS Select
Press SETUP to exit
2) Press [ENTER] (or [a]).
A message screen appears.
b
Auto Chapter Auto CH Scan
Set Clock Channel List
Press Yes to continue Auto Scan
press No to exit
Channel Setup Modify Channel
Tuner Select
Yes No
MTS Select
"Yes" is highlighted.
Note:
If you want to cancel it, press [a] to select "No", and then
press [ENTER].
3) Press [ENTER].
Auto memory channel scanning screen appears and starts
to memorize all the channels available in your area.
Record Mode
Scanning for Channels (CATV) ...
b
Auto Chapter Auto CH Scan
Total Channels Found: 001
Set Clock Channel List
Channel Setup Modify Channel
Tuner Select
Please wait until the confirmation screen appears.
The confirmation screen appears.
Example:
Record Mode
Total channels found (CATV): 009
b
Do you want to view the available
Auto Chapter Auto CH Scan
channels?
Set Clock Channel List
Channel Setup Modify Channel
Yes No
Tuner Select
"Yes" is highlighted.
Note:
If you don't want it, press [a] to select "No", and then
press [ENTER].
4) Press [ENTER].
"Channel List" screen appears. (Refer to the right column.)
Note:
If you want to receive or not receive the channel, press [p]
or [o] to select the channel, and then press [ENTER].
"Enabled" or "Disabled" appears.
5) Press [b] to return to "Recording Setup" screen.
Channel List
1) Select "Channel List".
5
2) Press [ENTER] (or [a]).
5
3) Press [b] to return to "Recording Setup" screen.
5
5
4, 5, a, b
-E20-
Recording Setup
Record Mode
Auto Chapter Auto CH Scan
b
Set Clock Channel List
Channel Setup Modify Channel
Tuner Select
MTS Select
Press SETUP to exit
"Channel List" screen appears.
Example:
Channel List
b
CATV 6 Enabled
5
CATV 8 Enabled
CATV 10 Enabled
CATV 12 Enabled
CATV 22 Enabled
CATV 24 Enabled
CATV 45 Enabled
CATV 91 Enabled
CATV 96 Enabled
Press ENTER to Disable
Note:
If you want to receive or not receive the channel, press [p]
or [o] to select the channel, and then press [ENTER].
"Enabled" or "Disabled" appears.
Need help? Call
1-800-813-3435
4
5
ENTER