Before Initial Setting; Common Procedure - Sanyo DVR-500 Instruction Manual

Common Procedure

• See "SETTING THE CLOCK" on pages E18 and "TUNER
SETTING" on pages E19 first.
• Turn on the TV and select the appropriate video input to suit
the connections to this unit. (Refer to your TV's owner manual.)
• Press [n] before setting if the unit is receiving the TV program.
1. Press [POWER] to turn on the power.
• "POWER ON" appears briefly on the FL display.
• "SANYO" logo appears on the TV screen.
2. Press [SETUP] in "NO DISC" mode or full stop mode.
"Menu" screen appears on the TV screen.
3. Press [p] (or [o]) to select the desired menu and go to the
reference page.
Play/Edit Disc
4
a
Record Program Record Status
5
Setup Menu Record List
Press SETUP to exit
Play/Edit Disc Recording Setup
Record Program DVD Control
4
a
Setup Menu General
Video
Audio
AV Select
Press SETUP to exit
Note:
When a disc is loaded, "Play/Edit Disc" can be selected.
a
Play/Edit Disc Play/Edit Titles
5
Record Program Edit Disc
Setup Menu
Press SETUP to exit

BEFORE INITIAL SETTING

Menu
See page E33.
See page E37.
Menu
See page E23.
See page E25.
See page E29.
See page E30.
See page E31.
See page E32.
Menu
See page E55.
See page E57.
-E22-
Important Note:
• In this instruction manual, the language in on-screen display
is English.
If you change the language, please follow the selected
language in on-screen display.
• You may need extra instructions during the setting. If a
message appears, please follow the instructions displayed
on the TV screen.
• For improvement, on-screen display subject to change
without notice.
SETUP
Need help? Call
1-800-813-3435
POWER
4
5