Table of Contents
Advertisement
Technical Information
5.16
Door Latch - Manual Release (P / Self Clean Models)
Important
Ensure the oven temperature is below 392
unlock the door using the Service Mode (refer to Section 6 Fault
Diagnosis) before performing this procedure.
Refer to Figure 5-10
1.
Bend the end of a stiff wire into a 4 hook – as shown.
2.
Carefully insert wire between door and control panel.
Caution
Ensure the wire does not contact the coated surfaced, or irreversible
damages to the surface can result.
3.
Pull the door latch by moving the wire horizontally to the right.
1.
Wire (formed into hook)
2.
Door Latch
Figure 5-10: Manual Release Of The Door Latch (Self Clean Models Only)
o
o
F (200
44
Master Chef Ovens
C), and attempt to
Hide quick links:
Advertisement
Table of Contents
