Important Safety Instructions - Miele PG 8504 Operating Instructions Manual

Laboratory glassware washer for laboratory glassware and utensils
Table of Contents

Advertisement

IMPORTANT SAFETY INSTRUCTIONS

8
This machine complies with all statutory safety requirements. How-
ever, inappropriate use can lead to personal injury and material
damage.
Read these instructions carefully before using the machine for the
first time to avoid the risk of accidents and damage to the machine.
Keep these instructions in a safe place where they are accessible
to users at all times.
Proper use
Use of this machine is only approved for the applications stated in
the operating instructions. Conversions, modifications, and any other
use are not permitted and could be dangerous.
The cleaning processes are only designed for laboratory glassware
and utensils which are designated as reprocessable by the manufac-
turer. The information provided by the manufacturer of the wash
items must be observed.
This machine is intended for indoor use in a stationary location
only.
Risk of injury
Please pay attention to the following notes to avoid injury.
The machine should only be installed, commissioned, repaired,
and maintained by a Miele authorized technician. A Miele service
contract is recommended to ensure full compliance with the norma-
tive and regulatory provisions. Incorrect repairs can cause consider-
able danger to users.
Do not install the machine in an area where there is any risk of ex-
plosion or of freezing conditions.
In order to reduce the risk of water damage, the area around the
machine should be limited to furniture and fittings that are designed
for use in commercial environments.
If the machine is built under a countertop, it must only be installed
under a continuous countertop run which is firmly secured to adja-
cent units to improve stability.
The electrical safety of this machine can only be guaranteed if it is
grounded properly. It is essential that this standard safety require-
ment is met. If in any doubt, please have the on-site wiring system
tested by a qualified electrician. Miele cannot be held liable for the
consequences of an inadequate grounding system (e.g. electric
shock).
A damaged or leaking machine could be dangerous and compro-
mise your safety. Disconnect the machine from the electrical supply
immediately and contact Miele Service.

Advertisement

Table of Contents
loading

Table of Contents