Operation; Switching On The Warewasher; Checking For Completeness; Washing - Miele PTD 701 Operating Instructions Manual

| |
English 6

Operation

6 Operation
6.1

Switching on the warewasher

The warewasher is ready for operation as soon as the start button lights up white.
6.2

Checking for completeness

Note: Ensure that there is always enough detergent and rinse aid available to achieve an optimum wash result.
6.3

Washing

Caution
Risk of scalding from hot wash water
Ø
Do not open the door during washing.
Ø
Before opening the door, terminate the washing programme by pressing the start button and wait a few seconds.
– Do not wash without a wash rack.
– Do not wash electrical cooking appliances.
– Do not wash parts made of wood.
– Do not wash ashtrays or objects covered with wax.
– Only wash heat-resistant plastic parts and those resistant to alkalis.
Instructions for a good wash result
– Soak the cutlery until it is clean. Do not use any foaming pre-cleaners.
– Do not polish glasses, cutlery or dishes. Germs and bacteria can be found even in fresh multi-purpose cloths.
– Wash parts made of aluminium, e.g. pots, containers or trays, only with a suitable detergent to avoid black discolouration.
Arranging the wash items in the wash rack
Ø
Remove large pieces of food residues.
Ø
Pour out beverage residues (outside the warewasher).
Ø
Place glasses, cups, bowls and pots rim down.
Ø
CAUTION! Possible risk of injury from sharp or pointed utensils when loading the wash racks! Wash cutlery upright in the cut-
lery holder or lying in the shallow wash rack. Always arrange the handle ends downwards. Make sure that the cutlery is well-
spaced.
Ø
Do not overload racks, so that the wash water can reach all dirty surfaces.
Ø
Space glasses to prevent them from rubbing against each other. This will avoid scratches.
Ø
For tall glasses, choose a wash rack with appropriate divisions so that the glasses are held in a stable position.
64
| |
11208020/04; 2023-07
2 s
Operating instructions