Clock; Fuel Gauge; Fuel Warning Indicator - Yamaha 115 Owner's Manual

EMU26700

Clock

Press the " " (mode) button repeatedly
until the indicator on the face of the gauge
points to " " (time). To set the clock, be
sure the gauge is in the "
Press the " " (set) button; the hour display
will begin blinking. Press the "
button until the desired hour is displayed.
Press the " " (set) button again, the minute
display will begin blinking. Press the "
(mode) button until the desired minute is dis-
played. Press the "
start the clock.
NOTE:
The clock operates on battery power. Dis-
connecting the battery will stop the clock.
Reset the clock after connecting the battery.
EMU26711

Fuel gauge

Eight segments indicate the fuel level. When
all segments are showing, the fuel tank is
full.
ECM00860
CAUTION:
The Yamaha fuel tank sensor differs from
conventional sensors. Incorrectly setting
the selector switch on the gauge will give
false readings. Consult your Yamaha
dealer on how to correctly set the selec-
" (time) mode.
" (mode)
" (set) button again to
Basic components
tor switch.
NOTE:
The fuel level reading can be affected by the
position of the sensor in the fuel tank and the
attitude of the boat in the water. Operation
with bow-up trim or continuous turning can
give false readings.
"
EMU26720

Fuel warning indicator

If the fuel level decreases to one segment,
the fuel level warning segment will begin to
blink.
ECM00880
CAUTION:
Do not continue to operate the engine
with full throttle if a warning device has
activated. Get back to the port within troll-
ing engine speed.
1. Fuel level warning segment
ZMU01745
25