Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DeWalt XR DCH263DH
Summary of Contents for DeWalt XR DCH263DH
- Page 1 DCH263...
- Page 2 English (original instructions) Copyright D WALT...
- Page 3 Fig. A Fig. B XXXX XX XX...
- Page 4 Fig. C Fig. D Fig. E Fig. F Fig. G...
- Page 5 English HEAVY-DUTY CORDLESS ROTARY HAMMERDRILL DCH263 Congratulations! the tool and the accessories, keep the hands warm (relevant for vibration), organisation of work patterns. You have chosen a D WALT tool. Years of experience, thorough EC-Declaration of Conformity product development and innovation make D WALT one of the most reliable partners for professional power tool users.
-
Page 6: Definitions: Safety Guidelines
English Batteries Chargers/Charge Times (Minutes)*** DCB112/ DCB115/ Weight (kg) DCB104 DCB107 DCB113 DCB116 DCB117 DCB118 DCB132 DCB119 Cat # DCB1102 DCB1104 DCB546 18/54 6.0/2.0 1.08 DCB547/G 18/54 9.0/3.0 1.46 135* 110* 135* DCB548 18/54 12.0/4.0 1.46 DCB549 18/54 15.0/5.0 2.12 DCB181 0.35 DCB182 0.61... -
Page 7: Personal Safety
English c ) Do not expose power tools to rain or wet conditions. b ) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled Water entering a power tool will increase the risk of electric shock. -
Page 8: Residual Risks
English g ) Follow all charging instructions and do not charge Do not recondition bits yourself. It should be done by an • the battery pack or tool outside the temperature authorized specialist. Improperly reconditioned bits could range specified in the instructions. Charging cause injury. - Page 9 English NOTICE: Under certain conditions, with the charger • Risk of burns due to accessories becoming hot during operation. plugged into the power supply, the exposed charging contacts inside the charger can be shorted by foreign • Risk of personal injury due to prolonged use. material.
-
Page 10: Wall Mounting
English light will blink repeatedly, indicating that the charging charger within reach of an electrical outlet, and away from a process has started. corner or other obstructions which may impede air flow. Use the back of the charger as a template for the location of the 3. -
Page 11: Storage Recommendations
English WARNING: Burn hazard. Battery liquid may be flammable The information provided in this section of the manual is if exposed to spark or flame. provided in good faith and believed to be accurate at the time the document was created. However, no warranty, expressed or WARNING: Never attempt to open the battery pack for implied, is given. -
Page 12: Package Contents
English DCB187, DCB189, DCBP034, DCBP034G, DCBP518, DCBP518G, Do not charge damaged battery packs. DCB546, DCB547, DCB547G, DCB548, DCB549. Refer to Technical Data for more information. Markings on Tool Do not expose to water. The following pictograms are shown on the tool: Have defective cords replaced immediately. Read instruction manual before use. -
Page 13: Assembly And Adjustments
English ASSEMBLY AND ADJUSTMENTS 2. Move the depth rod 11 so the distance between the end of the rod and the end of the bit equals the desired WARNING: To reduce the risk of serious personal drilling depth. injury, turn tool off and disconnect battery pack 3. -
Page 14: Operation
English OPERATION The centre position of the control button locks the tool in the off position. When changing the position of the control Instructions for Use button, be sure the trigger is released. nOTE: The first time the tool is run after changing the direction WARNING: Always observe the safety instructions and of rotation, you may hear a click on start-up. -
Page 15: Maintenance
English WARNING: To reduce the risk of serious personal 2. Using the mode selector dial 3 , select the mode injury, turn tool off and disconnect battery pack appropriate to desired application. Refer to Operation Modes. before making any adjustments or removing/ installing attachments or accessories. - Page 16 Belgique et www.dewalt.be WALT - Belgium BVBA Tel: NL 32 15 47 37 63 Luxembourg België en Luxemburg enduser.BE@SBDinc.com Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS) Tel: 70 20 15 10 www.dewalt.dk Roskildevej 22 Fax: 70 22 49 10 kundeservice.dk@sbdinc.com 2620 Albertslund Deutschland www.dewalt.de...