Table of Contents
Advertisement
5G Indoor CPE Connecting Cables
1
2
3
5G Indoor CPE LED Information
Figure 12. LED Information
5G Indoor CPE Installation Manual
Copyright © 2018, All Rights Reserved.
To connect cables:
Plug one end of the provided Ethernet cable into the available LAN port on the
indoor CPE. Once the CPE is in service, connect the other end of the Ethernet
cable into the wireless router.
Plug the AC/DC adapter connector into the DC 12V power port located on the
indoor CPE.
Insert one end of the power cord into the AC/DC adapter and then plug the
other end into an available outlet.
Confidential
14
Advertisement
Table of Contents
