Remove The Speakers - Lenovo ThinkBook 14s Gen 2 Hardware Maintenance Manual

Hide thumbs Also See for ThinkBook 14s Gen 2:
Table of Contents

Advertisement

Figure 23. Remove the fingerprint board module
Step 3.
Remove the switch cover.
Figure 24. Remove the switch cover
Step 4.
Separate the fingerprint board cable from the fingerprint board.
Figure 25. Separate the fingerprint board cable from the fingerprint board
Go to
https://support.lenovo.com/partslookup
replacement parts:
Switch cover
Fingerprint board
Fingerprint board cable

Remove the speakers

Make sure the following FRU (CRU) has been removed.
"Remove the lower case" on page 35
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Disconnect the speaker cable from the system board and release the speaker cable from the cable
guide. Remove the speakers.
44
Hardware Maintenance Manual
to look up the Lenovo part numbers of the following

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkbook 13s gen 2

Table of Contents