Installing a rear fan module
Steps
1. Insert the fan module into the fan bay.
2. Push the fan module into the fan bay, until it locks into place.
NOTE:
Ensure that the green LED on the fan module is illuminated, indicating that the module is functioning properly.
Figure 28. Installing a rear fan module
Power supply units
Removing a power supply unit
Steps
1. Press the orange release button to open the PSU release lever.
2. Hold the release lever, pull the PSU out of the enclosure.
CAUTION:
Ensure that you install a PSU blank if you are removing a PSU permanently.
30
Field service information