Cooling Fan Modules - Dell EMC PowerEdge MX7000 Field Service Manual

Cooling fan modules

NOTE: The system must be populated with the full set of fans to support the airflow requirements of the chassis.
Removing a front fan module
Steps
1. Press the release button to release the fan module.
2. Hold and pull the fan module out of the fan bay.
Figure 25. Removing a front fan module
Installing a front fan module
Steps
1. Insert the fan module into the fan bay.
2. Push the fan module into the fan bay, until it locks into place.
NOTE: Ensure that the green LED on the fan module is illuminated, indicating that the module is functioning properly.
28 Field service information