Canon LX-P5510 User Manual page 203

Status monitor Time after installation
message of ink tank
Warning1 55 days to 59 days
[5 days]
Operator call 1 60 days to 89 days
[30 days]
Operator call 2 From the 90 days
Operator call 3 60 days or longer
Maintaining Ink Quality
Display name on
Solution
status monitor
Ink refresh Appears 55 days after the ink tank is
・
timing 1 loaded.Printer will not stop.
( P.200) Performing ink refresh at this point in time
→ ・
does not consume ink.
Once ink refresh is performed, "Warning 1"
・
will be displayed after the next 55 days.
Exceeding ink Appears when ink refresh is not performed
・
refresh timing 1 when "Warning 1"is displayed. Printer will
( P.200) be forcibly stopped.
→
This operation does not consume ink.
・
Once ink refresh is performed, "Warning 1"
・
will be displayed after the next 55 days.
Exceeding ink Appears when ink refresh is not performed
・
refresh timing 2 at both "Warning 1" and "Operator Call
( P.209) 1".Printer will be forcibly stopped.
→
Note that performing ink refresh at this
・
timing will consume ink.
Once ink refresh is performed, "Warning 1"
・
will be displayed after the next 55 days
Exceeding ink Appears if printing or ink refresh has not
・
refresh timing 3 been performed at all for 60 days or more
( P.212) since last printing operation (only tuning
→
on the power does not count as printing
operation). Printer will be forcibly stopped.
Settling of the ink will have progressed to
・
a point where it cannot be returned to the
ink tank, therefore all ink within the flow
channels is discharged.
Note that this operation will consume
・
large amount of ink. In order to avoid this
condition, at least 1 printing operation
every 2 months is recommended.
Once ink refresh is performed, "Warning 1"
・
will be displayed after the next 55 days.
For LX-P5510 Only
（
199
）