Canon LX-P5510 User Manual page 117

Note
• The Stop position (or Cutting position) can be set in increments of 0.5 mm (0.02 inch)
between -10.0 (-0.39 inch) and +10.0 mm (+0.39 inch).
• To reset the Stop position (or Cutting position) settings to the defaults, click [Defaults].
5
Click [Send].
A confirmation message appears.
6
Click [Yes].
The setting is transmitted to the printer.
7
Perform test printing.
Check that the paper has been cut in the middle between two sheets of paper, and then start
an actual print job.
Using Utility Features
113