Changing The Ink Jetting Amount For Printing - Canon LX-P5510 User Manual

Changing the Ink Jetting Amount for Printing

Change the amount of ink used for printing.
You can adjust the overall density, changing color settings such as color balance and density to
exceed the setting range. You must first register a new paper type before increasing the ink jetting
amount for printing.
Important
• Up to 100 custom paper types can be registered.
• Pre-registered paper types cannot be changed.
• Administrative privileges over this printer are required to configure settings of this printer.
If a user without administrative privileges proceeds with configuration of settings, a message "You
do not have rights to printer management. Please contact your system administrator." appears.
For more details, see
• When increasing ink jetting amount for printing
– Printing may take a long time or produce blurred images.
Set Print Speed to [Auto] to adjust the speed to suit the image status. If the print result still needs
improvement, reduce the speed to 100 mm/sec or lower.
– Print ink may dry slowly.
Do not touch the print surface until the ink dries. When the density is set too high, ink may remain
damp, depending on the type of paper. Touching the print surface with wet ink might cause stains
on your hands, clothes, or surrounding area.
– The transport area may get stained.
Clean the transport area if stains appear on printed paper.
"Administrative privileges required for certain features (
Using Utility Features
P.105)"
→
( P.99)
→
.
135