Advertisement
Maintenance and cleaning
7
Service life of product extends and frequently
experienced problems will be reduced if it is
cleaned at regular intervals.
7.1 Cleaning Lint Filter /
Loading Door Inner Surface
Lint and fiber released from the laundry to the
air during the drying cycle are collected in the
Lint Filter.
C
Such fiber and lint are generally
formed during wearing and wash-
ing.
A
Always clean the lint filter and the
inner surfaces of the loading door
after each drying process.
C
You can clean the lint filter hous-
ing with a vacuum cleaner.
To clean the lint filter:
•
Open the loading door.
•
Remove the lint filter by pulling it up and
open the lint filter.
•
Clean lint, fiber, and cotton raveling by
hand or with a soft piece of cloth.
•
Close the lint filter and place it back into
its housing.
•
A layer can build up on the filter pores
that can cause clogging of the filter after
using the dryer for a while. Wash the lint
filter with warm water to remove the layer
that builds up on the lint filter surface.
Dry the lint filter completely before
reinstalling it.
30 / EN
•
Clean the entire inner surface of the
loading door and loading door gasket
with a soft damp cloth.
Dryer / User Manual
Advertisement
