Advertisement
Operating the product
•
When the child lock is activated, all
buttons on the panel except the On/
Off/Cancel and Child Lock buttons are
deactivated.
•
When the child lock is activated, indicator
symbols don't change if the position of
Program Selection button is changed.
When Program Selection button is turned
and function buttons are pressed, the
letters "CL" flashes on the screen.
•
The child lock has to be deactivated to
be able to start a new program after the
current program is finished or to be able
to interfere with the program.
To Deactivate The Child Lock:
•
Press and hold the child lock button for 3
seconds.
•
Child lock deactivates when the dryer is
turned off and on by the On/Off/Cancel
button.
6.12 Changing the program
after it is started
You can change the program you selected to
dry your laundry with a different program after
the machine starts running.
•
For example, to select Extra Dry instead
of Iron Dry, pause the program by
pressing the Start / Stand-by button.
•
Select the Extra Dry program using the
Program Selection button.
•
Press the Start/Stand-by button to start
the program.
28 / EN
Adding and removing clothes during
stand-by
•
If you want to add or remove clothes to/
from the machine after the drying program
starts:
•
Press the Start/Stand-by button to put the
machine in Stand-by state. The drying
operation stops.
•
Open the loading door while in Stand-
by state, and close the door after you
remove or add laundry.
•
Press the Start/Stand-by button to start
the program.
C
Adding laundry after the drying
operation starts may cause the
dried laundry inside the machine
to mix with wet laundry and leave
the laundry damp at the end of
operation.
C
Adding or removing laundry
during drying may be repeated as
many times as you wish. But this
operation continuously interrupts
the drying operation, and thus
increases program duration and
energy consumption. So, it is
recommended to add laundry
before the program starts.
C
If a new program is selected by
turning the program selection
knob while the machine is in
stand-by; the running program
terminates and new program
information is displayed on the
screen.
WARNING
inner surface of the drum while
adding or removing clothes during
a continuing program. The drum
surface is hot.
:
Do not touch the
Dryer / User Manual
Advertisement
