Left - Lenovo ThinkPad R15 Gen 2 User Manual

Left

™
1. USB-C connector (USB 3.1
Gen 1)
2. Always On USB 3.1 connector
Gen 1
4
E14/R14/E15/R15/S3 Gen 2 User Guide
• Charge your computer.
• Charge USB-C compatible devices with the output voltage and current of 5 V
and 3 A.
• Transfer data at USB 3.1 speed, up to 5 Gbps.
• Connect to an external display:
– USB-C to VGA: 1920 x 1080 pixels, 60 Hz
– USB-C to DP: 3840 x 2160 pixels, 60 Hz
• Connect to USB-C accessories to help expand your computer functionality. To
purchase USB-C accessories, go to
• Supply power to another computer using P-to-P (Peer to Peer) 2.0 charging
function. See "Use P-to-P 2.0 charging function" on page 23.
Note: When the battery power is below 10%, the connected USB-C accessories
might not work correctly.
With the Always On USB feature enabled, the Always On USB 3.1 connector Gen
1 can charge a USB-compatible device when the computer is on, off, in sleep
mode, or in hibernation mode.
Notes:
• By default, Always On USB is enabled and Charge in Battery Mode is
disabled in UEFI BIOS.
• When the computer is off or in hibernation mode, and Charge in Battery Mode
is disabled in UEFI BIOS, ensure that you have connected the computer to ac
power.
To enable the Always On USB feature:
1. Enter the UEFI BIOS menu. See "Enter the UEFI BIOS menu" on page 31.
2. Click Config ➙ USB ➙ Always On USB to enable the Always On USB
feature.
https://www.lenovo.com/accessories
.