Page 1
GoldStar ATS200 Battery Operated GPS Tracking Device Installation Guide STOP! READ THIS ENTIRE MANUAL BEFORE PROCEEDING WITH THE INSTALLATION OF THIS DEVICE. Rev. 00202306...
Page 2
GoldStar ATS200 Installation Guide Introduction This installation guide explains the procedure for covertly installing and operating the ATS200 Battery Operated Tracking device (hereafter referred to as “the Tracking Device”) in a vehicle. Major Components of the Tracking Device Rev. 00202306...
GoldStar ATS200 Installation Guide Installation Procedure Powering Up the Tracking Device 1. Locate the Power Button on the top side of the Tracking Device. 2. Press and hold the Power Button for 3-5 seconds until both the green and blue LEDs turn on.
Page 4
GoldStar ATS200 Installation Guide Mounting Options You can mount the Tracking Device in one of two ways: 1. Zip Tie Mounting A. Select a mounting point that you can wrap zip ties around. B. Wrap the zip ties (supplied in the Device...
Page 5
GoldStar ATS200 Installation Guide This page has been left blank intentionally. Rev. 00202306...
Need help?
Do you have a question about the GoldStar ATS200 and is the answer not in the manual?
Questions and answers