Related Documentation To Iec 61850 - ABB Relion SAM600 Communication Protocol Manual

Switchgear control unit

Hide thumbs Also See for Relion SAM600:

Table of Contents

Section 2

Introduction to IEC 61850

The data modelling uses the concept of logical nodes to identify the published information for

communication. The standard defines a set of logical nodes, each representing a communication

view of a process function with a number of data objects. For example, a transformer differential - or

line differential protection, because the standard defines only a differential protection. Therefore, it is

possible to adapt the logical node, which is defined in the standard, as a logical node class. The

standard defines methods to describe the actually used logical node as a logical node type which is

then based upon the logical node class. This allows all partners to interpret the logical node type

information because the description is completely given in the standard. The type description of all

logical nodes is part of the Data Type Template (DTT) section in the SCL description file of a station

or the IED.

Besides the information about the configuration of the communication facilities, this manual contains

the full description of all logical nodes available in the IEDs. The information about the logical nodes

and their data objects may be used to identify which signals are available for the functions as

described in the technical manual. The link to the technical manual is done in the logical node tables

by listing the signal name as given in the function block, or as seen in PCM600 or the LHMI.

2.1.1

Related documentation to IEC 61850

Use the latest revision of the documents listed, unless stated otherwise.

Document ID

IEC 61850-SER

Ed1.0 (2013-12-12) - (English)

IEC 61850-3

Ed2.0 (2013-12-12) - (English - French)

IEC 61850-4

Ed2.0 (2011-04-11) - (English - French)

IEC 61850-5

Ed2.0 (2013-01-30) - (English - French)

IEC 61850-6

Ed2.0 (2009-12-17) - (English)

IEC 61850-7-1

Ed2.0 (2011-07-15) - (English - French)

IEC 61850-7-2

Ed2.0 (2010-08-24) - (English)

IEC 61850-7-3

Ed2.0 (2010-12-16) - (English - French)

Table continues on next page

Title

Communication networks and systems in substations -

ALL PARTS