Table of Contents
Advertisement
MOTIX
MCU TLE9893-2QK
™
Evaluation kit user guide
2 System and functional description
Table 9
(continued) Characteristics and related parts of XMOT1
Component
Crimp terminals
Note:
5) www.molex.com
The push-in PCB terminal block XMOT2 can be used to connect the motor phases cables directly, without
needing any crimped cables, connectors, or screw driver.
The pinout of XMOT2 is depicted in
The characteristics of the PCB terminal block XMOT2 are listed in
Table 10
Characteristics of XMOT2
Component
PCB terminal block
Note:
6) www.phoenixcontact.com
For more information, and manufacturer numbers of A more detailed description and manufacturer XMOT1 and
XMOT2 refer to the BOM in
2.2.2
External motor control sensors
External SPI, TMR, Hall sensors and encoders can be connected to the PCB header sockets XSPI1, XTMR1,
XHALL1 and XENC1 respectively for motor control. They can be observed in
Since some pins of the TLE9893-2QKW62S are connected to multiple interfaces and connectors, only certain
interfaces and connectors can be used simultaneously. Refer to
User guide
Manufacturer part number
Molex Mini-Fit Plus 45750-1111
Figure
9.
Manufacturer part number
Phoenix contact 1792876
BOM for MOTIX
MCU TLE9893-2QK evaluation
™
Characteristics
Crimp terminal, 18-20 AWG, max.
current 13 A
should be crimped to the motor
phases cables and introduced into
the crimp receptacle housing. This
component is not delivered with
the evaluation kit.
Table
10.
Characteristics
Push-in spring PCB socket, one
row, 3 circuits, pitch 5 mm, nominal
current 16 A, cable AWG from 26 to
6)
14
kit.
Figure
Table 8
for further information.
17
5)
. These terminals
.
10.
Rev. 01.00
2023-06-12
Advertisement
Table of Contents
Need help?
Do you have a question about the MOTIX MCU TLE9893-2QK and is the answer not in the manual?
Questions and answers