Table of Contents
Advertisement
Technical Information
6.4.2.2
G1470 / G2470 – Service Mode
Initial requirements
1. Open the door.
2. Switch off the machine.
Accessing
1. Press and hold the program button.
2. Switch on the machine.
3. Release the program button when the decimal point is in the display.
4. Immediately press and release the program button 3 times and at the 3rd time
hold until the Rinse & Hold LED flashes.
5. Release the program button.
If the Rinse & Hold LED has not started to flash within approx. 4 sec., the accessing
procedure must be repeated.
Acknowledgement Indicator
Successful accessing of the Service mode is indicated by a slow flashing Rinse &
Hold LED (1 Hz).
Options
Refer to Tables: 6-43.
G1000 / G2000 Dishwashers
168
Advertisement
Table of Contents
