National Instruments PCI-8361 User Manual

page of 128

/ 128
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

MXI

MXI-Express x1 Series User Manual

MXI-Express x1 Multisystem eXtension Interface for PCI,

PCI Express, CompactPCI/CompactPCI Express, ExpressCard,

and PXI/PXI Express Bus Computers

PCI-8361

PCI-8366

PCIe-8361

PCIe-8362

PCIe-8363

MXI-Express x1 Series User Manual

November 2022

373241F-01

-Express x1

PXI-8360

PXI-8361

PXI-8364

PXI-8366

PXI-8367

PXI-8368

PXIe-8360

PXIe-8364

ExpressCard-8360

Table of Contents

Need help?

Do you have a question about the PCI-8361 and is the answer not in the manual?

Questions and answers

Summary of Contents for National Instruments PCI-8361

Page 1 -Express x1 MXI-Express x1 Series User Manual MXI-Express x1 Multisystem eXtension Interface for PCI, PCI Express, CompactPCI/CompactPCI Express, ExpressCard, and PXI/PXI Express Bus Computers PCI-8361 PXI-8360 PXI-8368 PCI-8366 PXI-8361 PXIe-8360 PCIe-8361 PXI-8364 PXIe-8364 PCIe-8362 PXI-8366 ExpressCard-8360 PCIe-8363 PXI-8367 MXI-Express x1 Series User Manual...
Page 2 11500 North Mopac Expressway Austin, Texas 78759-3504 USA Tel: 512 683 0100 For further support information, refer to the NI Services appendix. appendix. To comment on NI documentation, refer to the NI website at and enter the Info Code ni.com/info feedback © 2011–2022 National Instruments. All rights reserved.
Page 3 National Instruments Corporation. National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
Page 4 ™ The ExpressCard word mark and logos are owned by PCMCIA and any use of such marks by National Instruments is under license. The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Page 5 Operation of this hardware in a residential area is likely to cause harmful interference. Users are required to correct the interference at their own expense or cease operation of the hardware. Changes or modifications not expressly approved by National Instruments could void the user’s right to operate the hardware under the local regulatory rules.
Page 7: Table Of Contents
Chapter 3 Installation and Configuration Unpacking......................... 3-1 Hardware Installation ....................... 3-1 Installing an PCI-8361 or PCIe-8361/8362/8363 Host Card........3-1 Installing the Low-Profile Bracket (Optional)..........3-3 Installing an ExpressCard-8360 Host Card .............. 3-5 Installing a PXI-8360/8364/8367/8368 or PXIe-8360/8364 Board ......3-6 Cabling........................
Page 8 Contents Appendix A Specifications Appendix B Specifications for Legacy Products Appendix C Common Questions Appendix D PCI-8366 Low-Profile Bracket Installation Instructions Appendix E NI Services Glossary Index viii | ni.com...
Page 9: About This Manual
About This Manual This manual describes the features, functions, and operation of the PCI-8361, PCI-8366, PCIe-8361, PCIe-8362, PCIe-8363, PXI-8360/8361/8364/8366/8367/8368, PXIe-8360/8364, and ExpressCard-8360 MXI-Express x1 series of products. Products Covered The model numbers listed below are followed by their specific NI assembly Note numbers in parentheses.
Page 10: Related Documentation
About This Manual Related Documentation The following documents contain information that you might find helpful as you read this manual: • Set Up Your MXI-Express x1 System • Your computer or chassis documentation • PXI-1 PXI Hardware Specification, Revision 2.1 •...
Page 11: Introduction
Physically separate the measurement or automation system from a host PC or laptop. • Combine PCI Express, CompactPCI, CompactPCI Express, PXI, PXI Express, and CompactRIO devices into the same system. Table 1-1 lists the products covered by this manual, and lists their features for comparison. © National Instruments Corporation | 1-1...
Page 12: Functional Overview
Chapter 1 Introduction Table 1-1. Feature Comparison of Available MXI-Express x1 Interfaces Number of Model Slot Type Ports Cable Support PCI-8361 MXI-Express x1 Copper PCI-8366 MXI-Express x1 Fiber PCIe-8361 PCI Express x1 MXI-Express x1 Copper PCIe-8362 PCI Express x1 MXI-Express x1 Copper...
Page 13 NI Developer Zone document Tips to Help You Successfully Use MXI-Express Controllers at ni.com/zone On certain legacy MXI-Express x1 products that contain the dip switch package, the secondary switches may serve a reserved purpose. © National Instruments Corporation | 1-3...
Page 14: Functional Block Diagrams
Chapter 1 Introduction Functional Block Diagrams Figure 1-1. PCI-8361 (199392x-01L) Block Diagram BIOS Compat Mode Reverse PCIe-to-PCI MXI-Express x1 Bridge PCIe Gen 1 x1 Copper Figure 1-2. PCI-8366 (199392x-02L) Block Diagram BIOS Compat Mode Reverse PCIe-to-PCI MXI-Express x1 Bridge PCIe Gen 1 x1 Fiber Optic 1-4 | ni.com...
Page 15 PCIe Switch MXI-Express x1 PCIe Gen 1 x1 Copper Figure 1-4. PCIe-8362 (190735x-01L) Block Diagram BIOS Compat Mode MXI-Express x1 Coppe PCIe Gen 1 x1 PCIe Switch MXI-Express x1 PCIe Gen 1 x1 Copper © National Instruments Corporation | 1-5...
Page 16 Chapter 1 Introduction Figure 1-5. PCIe-8363 (199042D-01L) Block Diagram BIOS Compat Mode PCIe Switch MXI-Express x1 PCIe Gen 1 x1 Copper Figure 1-6. PXI-8360 (191373x-01) Block Diagram ID Device MXI-Express x1 PCIe Gen 1 x1 Copper Function 0 PCIe-to Bridge Function 2 1-6 | ni.com...
Page 17 MXI-Express x1 Series User Manual Figure 1-7. PXI-8364 (199991x-02L) Block Diagram MXI-Express x1 PCIe Gen 1 x1 Reverse Copper PCIe-to-PCI Bridge Figure 1-8. PXI-8367 (199991x-04L) Block Diagram Reverse PCIe-to-PCI MXI-Express x1 Bridge PCIe Gen 1 x1 Fiber Optic © National Instruments Corporation | 1-7...
Page 18 Chapter 1 Introduction Figure 1-9. PXI-8368 (157298x-02L) Block Diagram ID Device PCIe Gen 1 x1 Function 0 PCIe-to MXI-Express x1 Bridge Function 2 Fiber Optic Figure 1-10. PXIe-8360 (194402x-01L) Block Diagram PCIe-to- SMBUS PCI Bridge Master PCIe Gen 1 x4 MXI-Express x1 PCIe Gen 1 x1 Copper...
Page 19 MXI-Express x1 Series User Manual Figure 1-11. PXIe-8364 (193970x-01L) Block Diagram MXI-Express x1 PCIe Gen 1 x1 PCIe Gen 1 x4 Copper PCIe Switch © National Instruments Corporation | 1-9...
Page 20: Basic Mxi-Express X1 Systems
Chapter 1 Introduction Figure 1-12. ExpressCard-8360 (198266x-01L) Block Diagram PCIe MXI-Express x1 PCIe Gen 1 x1 PCIe Gen 1 x1 Switch Copper The ExpressCard-8360 (Part Number 192290x-01) has the same architecture Note as the 198266x-01L version, except that it uses a signal buffer instead of a PCI Express switch.
Page 21 Host PC to Target VXI Chassis Laptop PC to Target CompactRIO Chassis In this manual, whenever a PXI or PXI Express chassis is referenced, a Note CompactPCI or CompactPCI Express chassis could be used instead. © National Instruments Corporation | 1-11...
Page 22: Larger Mxi-Express X1 Systems
For these configurations the boards will likely report a valid cable link via the front panels LEDs. Since these link scenarios expose a possible data integrity issue that may not be obvious to the user, National Instruments strongly recommends against using these configurations.
Page 23 Figure 1-14 shows how you can use MXI-Express x1 cards to connect multiple expansion chassis to a PC in a star or daisy-chain topology. Figure 1-14. Example MXI-Express x1 System Expansion Topologies Star Topology Daisy-Chain Topology © National Instruments Corporation | 1-13...
Page 24 For these configurations the boards will likely report a valid cable link via the front panels LEDs. Since these link scenarios expose a possible data integrity issue that may not be obvious to the user, National Instruments strongly recommends against using these configurations.
Page 25: Getting Started
This chapter explains what you will need to set up various MXI-Express x1 hardware configurations. The products covered in this chapter are the PCI-8361, PCIe-8361/8362/8363, PXI-8360/8364/8367/8368, PXIe-8360/8364, and ExpressCard-8360. For the remainder of this manual the term MXI-Express x1 product refers to any of these products.
Page 26: Connecting A Pc Or Laptop To An Expansion Chassis
Chapter 2 Getting Started • Host Board—The MXI-Express x1 board of a cabled pair of boards that is closer to the CPU. • Target Board—The MXI-Express x1 board of a cabled pair of boards that is farther from the CPU. •...
Page 28: Connecting Additional Expansion Chassis To A System
Chapter 2 Getting Started Connecting Additional Expansion Chassis to a System Using a MXI-Express x1 Copper or Fiber Cable Refer to the Terminology section for more detail on the items in this list. Equipment Needed  Chassis (or embedded controller with ExpressCard slot) to daisy-chain from ...
Page 31: Installation And Configuration
Installing an PCI-8361 or PCIe-8361/8362/8363 Host Card Complete the following steps to install the PCI-8361 or PCIe-8361/8362/8363 in your computer. Power off your computer. To protect both yourself and the computer from electrical hazards, your Caution computer should remain off until you finish installing all hardware as instructed.
Page 32 Unplug the computer and wait 30 seconds to allow the energy stored in the computer’s power supply to fully dissipate. Select any available PCI slot for the PCI-8361 or PCI Express (x1 or wider) expansion slot for the PCIe-8361/8362/8363. Locate the metal bracket that covers the cut-out in the back panel of the computer for the slot you have selected.
Page 33: Installing The Low-Profile Bracket (Optional)
MXI-Express x1 Series User Manual Installing the Low-Profile Bracket (Optional) To install the PCI-8361 or PCIe-8361/8363 in a host computer that requires a low-profile height card, the front bracket must be replaced with the low-profile bracket included with your kit.
Page 34 Chapter 3 Installation and Configuration PCIe-8366 Disconnect the fiber optic cable from the cabled PCI Express connector. Move the release lever downwards until it is pointing towards you. Gently pull the release lever toward you to release the catch mechanism of the SFP module. The SFP module should easily slide out of the receptacle as shown in Figure 3-3.
Page 35: Installing An Expresscard-8360 Host Card
If your computer is already running (or hibernating, etc.) when you install an ExpressCard-8360, you must reboot to detect the PXI system. Otherwise, the PXI system is detected when you start your computer. Figure 3-6 shows how to insert the ExpressCard-8360 into a laptop and connect the cable. © National Instruments Corporation | 3-5...
Page 36: Installing A Pxi-8360/8364/8367/8368 Or Pxie-8360/8364 Board
Chapter 3 Installation and Configuration Figure 3-6. Installing the ExpressCard-8360 Into a Laptop MXI-Express x1 Cable ExpressCard Slot Portable Computer Installing a PXI-8360/8364/8367/8368 or PXIe-8360/8364 Board Table 3-1 provides information on which PXI or PXI Express MXI-Express x1 boards are compatible with which chassis slot types.
Page 37 Figure 3-7. Figure 3-7. Example NI PXI Board Installation into a PXI Chassis PXI/CompactPCI Chassis Ejector Handle in Down Position NI PXI Board Injector/Ejector Rail © National Instruments Corporation | 3-7...
Page 38: Cabling
PXI Express board and chassis. Cabling MXI-Express x1 products support two types of cable of various lengths. Table 3-2 and 3-3 list the MXI-Express x1 cables available from National Instruments. Table 3-2. National Instruments MXI-Express x1 Copper Cables Cable Length (Meters)
Page 39: Powering Off The Mxi-Express X1 System
The LEDs on MXI-Express x1 cards provide status information about power supplies and link state. The PCI-8361, PXI-8364/8367, and PXIe-8364 all have one tri-color LED on the panel, indicating power and link status. The PCIe-8362 has two tri-color LEDs on the panel, indicating power and link status for each port.
Page 40 Chapter 3 Installation and Configuration Table 3-4. LED Status Descriptions of MXI-Express x1 Products Board Color Meaning PCI-8361 (199392x-01L) PWR/LINK Power is off PCIe-8362 (190735x-01L) Blinking Red Power is out of spec PXI-8364 (199991x-02L) Solid Amber Power is within spec;...
Page 41 PXIe-1062 uses the last link for a PCI Express to PCI bridge for PXI communication, this link should always be active. Different chassis topologies will give different default behaviors. Contact your chassis’ manufacturer for more information on your chassis’ topology. © National Instruments Corporation | 3-11...
Page 42: Software Installation And Configuration
Chapter 3 Installation and Configuration Software Installation and Configuration Installation MXI-Express x1 is based on PCI Express technology, using PCI Express switches and/or bridges to enable control of a PXI or PXI Express chassis from a PC or laptop with an available PCI, PCI Express, or ExpressCard slot.
Page 43 These specifications are typical at 25 °C, unless otherwise stated, and are Note subject to change without notice. Physical Dimensions 6.3 cm × 12.1 cm (2.48 in. × 4.76 in.) Maximum cable length Slot requirements One PCI slot (standard height or low profile) © National Instruments Corporation | A-1...
Page 44 Appendix A Specifications Compatibility Fully compatible with the PCI Specification, Revision 3.0 Weight 0.05 kg (0.11 lb) typical Power Requirements Power Rail Typical Current Maximum Current +3.3 V 155 mA 250 mA +5 V 155 mA 250 mA 1 mA Environment Maximum altitude 2,000 m...
Page 45 NI recognizes that eliminating certain hazardous substances from our products is beneficial to the environment and to NI customers. For additional environmental information, refer to the Minimize Our Environmental Impact web page at . This page contains the environmental regulations and ni.com/environment © National Instruments Corporation | A-3...
Page 46 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 47 Power is within spec; link established Power Requirements Power Rail Typical Current Maximum Current +3.3 V 155 mA 250 mA +5 V 265 mA 400 mA 1 mA Environment Maximum altitude 2,000 m Pollution Degree Indoor use only. © National Instruments Corporation | A-5...
Page 48 Appendix A Specifications Operating Environment Ambient temperature range 0 to 55 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) Operating relative humidity 10 to 90%, noncondensing (Tested in accordance with IEC 60068-2-56.) Storage Environment Ambient temperature range -20 to 70 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) Relative humidity range...
Page 49 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 50 Appendix A Specifications PCIe-8361 (199042A/B/C-01L) These specifications are typical at 25 °C, unless otherwise stated, and are Note subject to change without notice. Physical Dimensions 6.7 cm × 7.1 cm (2.6 in. × 2.8 in.) Maximum cable length Slot requirements One slot (PCI Express, standard height or low profile) Compatibility...
Page 51 Online Product Certification To obtain product certifications and the Declaration of Conformity (DoC) for this product, visit , search by model number or product line, and click the appropriate ni.com/certification link in the Certification column. © National Instruments Corporation | A-9...
Page 52 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 53 • IEC 61010-1, EN 61010-1 • UL 61010-1, CSA 61010-1 For UL and other safety certifications, refer to the product label or the Online Note Product Certification section. © National Instruments Corporation | A-11...
Page 54 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/ weee A-12 | ni.com...
Page 55 Maximum Current +3.3 V 650 mA 1150 mA +3.3 VAux 1 mA 10 mA +12 V Environmental This product meets the following environmental standards and requirements for electrical equipment in measurement, control, and laboratory use. © National Instruments Corporation | A-13...
Page 56 Appendix A Specifications Maximum altitude 2,000 m (800 mbar) at a 25 °C ambient temperature Pollution Degree Indoor use only. Operating Environment Operating temperature, local 0 to 55 °C Operating humidity 10 to 90%, noncondensing System air flow 0.4 m/s (80 LFM) Storage Environment Ambient temperature range -20 to 70 °C...
Page 57 Furthermore, any changes or modifications to the product not expressly approved by NI could void your authority to operate it under your local regulatory rules. EMC Notices Refer to the following notices for cables, accessories, and prevention measures necessary to ensure the specified EMC performance. © National Instruments Corporation | A-15...
Page 58 Appendix A Specifications For EMC declarations and certifications, and additional information, refer Notice to the Product Certifications and Declarations section. Changes or modifications to the product not expressly approved by NI Notice could void your authority to operate the product under your local regulatory rules. The performance of this product can be disrupted if subjected to Notice Electrostatic Discharge (ESD) during operation.
Page 59 Waste Electrical and Electronic Equipment (WEEE)—At the end of the product life cycle, all NI products must be disposed of according to local laws and regulations. For more information about how to recycle NI products in your region, visit ni.com/environment/weee © National Instruments Corporation | A-17...
Page 60 Appendix A Specifications — ni.com/environment/rohs_china 。 (For information about China RoHS compliance, go to ni.com/environment/rohs_china Product Certifications and Declarations Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance information. To obtain product certifications and the DoC for NI products, visit ni.com/ , search by model number, and click the appropriate link. product-certifications PXI-8360 (191373x-01) These specifications are typical at 25 °C, unless otherwise stated, and are...
Page 61 Test profile developed in accordance with MIL-PRF-28800F.) Random Vibration Operating 5 to 500 Hz, 0.3 g Nonoperating 5 to 500 Hz, 2.4 g (Tested in accordance with IEC 60068-2-64. Nonoperating test profile exceeds the requirements of MIL-PRF-28800F, Class 3.) © National Instruments Corporation | A-19...
Page 62 Appendix A Specifications Safety This product is designed to meet the requirements of the following standards of safety for electrical equipment for measurement, control, and laboratory use: • IEC 61010-1, EN 61010-1 • UL 61010-1, CSA 61010-1 For UL and other safety certifications, refer to the product label or the Online Note Product Certification...
Page 63 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 64 Appendix A Specifications Power Rail Typical Current Maximum Current +12 V 10 mA 12 mA -12 V 1 mA Environment Maximum altitude 2,000 m Pollution Degree Indoor use only. Operating Environment Ambient temperature range 0 to 55 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) Operating relative humidity 10 to 90%, noncondensing...
Page 65 Online Product Certification To obtain product certifications and the Declaration of Conformity (DoC) for this product, visit , search by model number or product line, and click the appropriate ni.com/certification link in the Certification column. © National Instruments Corporation | A-23...
Page 66 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 67 LED Status Descriptions Color Meaning PWR/LINK Power is off Blinking Red Power is out of spec Solid Amber Power is within spec; no link to chassis Solid Green Power is within spec; link established © National Instruments Corporation | A-25...
Page 68 Appendix A Specifications Power Requirements Power Rail Typical Current Maximum Current +3.3 V 525 mA 800 mA +5 V 8 mA 10 mA +12 V 10 mA 12 mA -12 V 1 mA Environment Maximum altitude 2,000 m Pollution Degree Indoor use only.
Page 69 For EMC declarations and certifications, refer to the Online Product Note Certification section. CE Compliance This product meets the essential requirements of applicable European Directives as follows: • 2006/95/EC; Low-Voltage Directive (safety) • 2004/108/EC; Electromagnetic Compatibility Directive (EMC) © National Instruments Corporation | A-27...
Page 70 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 71 (Tested in accordance with IEC 60068-2-56.) Storage Environment Ambient temperature range -40 to 70 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) Relative humidity range 5 to 95%, noncondensing (Tested in accordance with IEC 60068-2-56.) © National Instruments Corporation | A-29...
Page 72 Appendix A Specifications Shock and Vibration Operational shock 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27. Test profile developed in accordance with MIL-PRF-28800F.) Nonoperating shock 50 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27.) Random Vibration Operating 5 to 500 Hz, 0.3 g...
Page 73 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 74 Appendix A Specifications Physical Dimensions 10.0 cm × 16.0 cm (3.9 in. × 6.3 in.) Maximum cable length Slot requirements One PXI Express system slot Compatibility Fully compatible with the PXI-5 Express Hardware Specification, Revision 1.0 Weight 0.17 kg (0.37 lb) typical Power Requirements Power Rail Typical Current...
Page 75 • EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity • EN 55011 (CISPR 11): Group 1, Class A emissions • AS/NZS CISPR 11: Group 1, Class A emissions © National Instruments Corporation | A-33...
Page 76 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 77 Maximum altitude 2,000 m Pollution Degree Indoor use only. Operating Environment Ambient temperature range 0 to 55 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2. Meets MIL-PRF-28800F Class 3 low temperature limit and © National Instruments Corporation | A-35...
Page 78 Appendix A Specifications MIL-PRF-28800F Class 2 high temperature limit.) Operating relative humidity 10 to 90%, noncondensing (Tested in accordance with IEC 60068-2-56.) Storage Environment Ambient temperature range -40 to 71 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2. Meets MIL-PRF-28800F Class 3 limits.) Relative humidity range 5 to 95%, noncondensing...
Page 79 For additional environmental information, refer to the Minimize Our Environmental Impact web page at . This page contains the environmental regulations and ni.com/environment directives with which NI complies, as well as other environmental information not included in this document. © National Instruments Corporation | A-37...
Page 80 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 81 (Tested in accordance with IEC 60068-2-6.) Nonoperating test profile exceeds the requirements of MIL-PRF-28800F, Class 3.) Nonoperating drop test 2 drops in 3 mutually exclusive axes from 75 cm onto no-cushioning vinyl tile surface © National Instruments Corporation | A-39...
Page 82: Appendix A Specifications
Appendix A Specifications Safety This product is designed to meet the requirements of the following standards of safety for electrical equipment for measurement, control, and laboratory use: • IEC 61010-1, EN 61010-1 • UL 61010-1, CSA 61010-1 For UL and other safety certifications, refer to the product label or the Online Note Product Certification...
Page 83 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 85: Specifications For Legacy Products
For specifications on current generation products, refer to Appendix A, Specifications. PCIe-8361 (195315x-01L) These specifications are typical at 25 °C, unless otherwise stated, and are Note subject to change without notice. No longer available for purchase. © National Instruments Corporation | B-1...
Page 86 Appendix B Specifications for Legacy Products Functional Block Diagram Figure B-1. PCIe-8361 Repeater Version (195315x-01L) Block Diagram Signal Repeater MXI-Express x1 PCIe Gen 1 x1 Copper Physical Dimensions 6.9 cm × 8.9 cm (2.7 in. × 3.5 in.) Maximum cable length Slot requirements One slot (PCI Express, standard height or low profile)
Page 87 EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity • EN 55011 (CISPR 11): Group 1, Class A emissions • AS/NZS CISPR 11: Group 1, Class A emissions • FCC 47 CFR Part 15B: Class A emissions © National Instruments Corporation | B-3...
Page 88 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 89 Indoor use only Operating Environment Ambient temperature range 0 to 55 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) Relative humidity range 10 to 90%, noncondensing (Tested in accordance with IEC 60068-2-56.) © National Instruments Corporation | B-5...
Page 90 Appendix B Specifications for Legacy Products Storage Environment Ambient temperature range -40 to 70 °C (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) Relative humidity range 5 to 95%, noncondensing (Tested in accordance with IEC-60068-2-56.) Safety This product is designed to meet the requirements of the following standards of safety for electrical equipment for measurement, control, and laboratory use: •...
Page 91 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 92 Appendix B Specifications for Legacy Products Power Requirements Power Rail Typical Current Maximum Current +3.3 V 1.8 A 2.0 A +3.3 VAux 1 mA 5 mA +12 V Environment Maximum altitude 2,000 m Pollution Degree Indoor use only Operating Environment Ambient temperature range 0 to 55 °C (Tested in accordance with IEC 60068-2-1 and...
Page 93 For additional environmental information, refer to the Minimize Our Environmental Impact web page at . This page contains the environmental regulations and ni.com/environment directives with which NI complies, as well as other environmental information not included in this document. © National Instruments Corporation | B-9...
Page 94 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 95 LED Status Descriptions Color Meaning PWR/LINK Power is off Blinking Red Power is out of spec Solid Amber Power is within spec; no link to chassis Solid Green Power is within spec; link established © National Instruments Corporation | B-11...
Page 96 Appendix B Specifications for Legacy Products Power Requirements Power Rail Typical Current Maximum Current +3.3 V 440 mA 650 mA +5 V 8 mA 10 mA +12 V 10 mA 12 mA -12 V 1 mA Environment Maximum altitude 2,000 m Pollution Degree Indoor use only.
Page 97 For EMC declarations and certifications, refer to the Online Product Note Certification section. CE Compliance This product meets the essential requirements of applicable European Directives as follows: • 2006/95/EC; Low-Voltage Directive (safety) • 2004/108/EC; Electromagnetic Compatibility Directive (EMC) © National Instruments Corporation | B-13...
Page 98 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 99 The PCI-8336 and PXI-8336 are part of the MXI-4 family of products and have the same cable connectors as the PCI-8366, PXI-8366, and PXI-8367, but will only function when connected in the valid case as shown. © National Instruments Corporation | B-15...
Page 100 Appendix B Specifications for Legacy Products Connectivity Support For Daisy-Chaining From Chassis Targets PXI Chassis Slot Type Product PXI-8366 PXI-8336 PXI or PXIe Hybrid PXI-8367  —  PXI-8336 — The PXI-8336 is part of the MXI-4 family of products and has the same cable connector as the PCI-8366, PXI-8366, and PXI-8367, but will only function when connected in valid cases as shown.
Page 101 (Tested in accordance with IEC 60068-2-1 and IEC 60068-2-2.) Relative humidity range 5 to 95%, noncondensing (Tested in accordance with IEC 60068-2-56.) Shock and Vibration Operational shock 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27. © National Instruments Corporation | B-17...
Page 102 Appendix B Specifications for Legacy Products Test profile developed in accordance with MIL-PRF-28800F.) Nonoperating shock 50 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC 60068-2-27.) Random Vibration Operating 5 to 500 Hz, 0.3 g Nonoperating 5 to 500 Hz, 2.4 g (Tested in accordance with IEC 60068-2-64.
Page 103 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 104 Appendix B Specifications for Legacy Products ExpressCard-8360 (192290x-01) These specifications are typical at 25 °C, unless otherwise stated, and are Note subject to change without notice. Physical Dimensions 10.2 cm × 3.4 cm (4.0 in. × 1.3 in.) Maximum cable length Slot requirements One 34 mm or 54 mm slot (ExpressCard) Compatibility...
Page 105 CE, C-Tick, and FCC Part 15 (Class A) Compliant For EMC compliance, operate this device with shielded cabling. Note In the presence of ESD or surge events, the link may fail. If this happens, the user should reboot the host computer. © National Instruments Corporation | B-21...
Page 106 At the end of the product life cycle, all products must be sent to EU Customers a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste and Electronic Equipment, visit ni.com/environment/...
Page 107: Appendix C Common Questions
• Improved error correction and handling for noisy or harsh environments. • Improved mechanical connectivity. • Improved performance. • Support for two chassis from a single card in the host PC. • Lower cost. © National Instruments Corporation | C-1...
Page 108 Appendix C Common Questions Can I connect a MXI-3 or MXI-4 board to a MXI-Express x1 board? No. MXI-3, MXI-4, and MXI-Express x1 boards use different cable connectors and protocols in most cases and cannot be mixed. This is because the board-to-board communication protocols differ.
Page 109 Universal options for copper and fiber-optic MXI-4 products are available upon request. With the copper MXI-Express PXI modules, you can control a PXI chassis from a PCI Express or ExpressCard slot in your host computer using the PCIe-8361, PCIe-8362, PCIe-8363, or ExpressCard-8360. © National Instruments Corporation | C-3...
Page 110 Appendix C Common Questions In addition to these differences, there is one additional PCI bridge across the Note host and target link compared to a MXI-4 link which will be visible to the operating system (OS). If you replace any MXI-4 compatible products with MXI-Express x1 products, the additional bridge will cause the OS to rediscover all devices that were part of the existing MXI system.
Page 111: Pci-8366 Low-Profile Bracket Installation Instructions
Remove the two 4-40 × 1/4 inch Phillips head screws that attach the standard height bracket to the card as shown in Figure D-2. Set the screws aside to re-use when installing the low-profile bracket. © National Instruments Corporation | D-1...
Page 112 Appendix D PCI-8366 Low-Profile Bracket Installation Instructions Remove the standard height bracket as shown in Figure D-2. Figure D-2. Removing Bracket Standard Height Bracket Front Side of Card 4-40 ×1/4 inch Phillips Head Screws (x2) Mounting Tab Fit the low-profile bracket onto the PCI-8366 by aligning the square cutout on the bracket with the SFP receptacle on the card.
Page 113: Ni Services
NI product. Product registration facilitates technical ni.com/register support and ensures that you receive important information updates from NI. NI corporate headquarters is located at 11500 N Mopac Expwy, Austin, TX, 78759-3504, USA. © National Instruments Corporation | E-1...
Page 115: Glossary
Degrees. ≥ Equal or greater than. ≤ Equal or less than. Percent. Ω Ohms. Amperes. ANSI American National Standards Institute. Application Programming Interface—The direct interface that an end user sees when creating an application. © National Instruments Corporation | G-1...
Page 116 Glossary Byte—Eight related bits of data, an 8-bit binary number. Also used to denote the amount of memory required to store one byte of data. BIOS Basic Input/Output System. BIOS functions are the fundamental level of any PC or compatible computer. BIOS functions embody the basic operations needed for successful use of the computer’s hardware resources.
Page 117 FPGA Field Programmable Gate Array—A logic device that has its functionality defined after it is manufactured. (1) Grams. (2) A measure of acceleration equal to 9.8 m/s GPIB General Purpose Interface Bus (IEEE 488). © National Instruments Corporation | G-3...
Page 118 Glossary A measure of random vibration. The root mean square of acceleration levels in a random vibration test profile. Hexadecimal—The numbering system with base 16, using the digits 0 to 9 and letters A to F. host board The MXI-Express x1 board of a cabled pair of boards that is closer to the CPU.
Page 119 MXI-4 A previous generation of MXI products (compared to MXI-Express x1) that offers similar connectivity as MXI-3, but with link error correction capability. MXI-Express An extension of MXI based upon PCI Express. © National Instruments Corporation | G-5...
Page 120 LC duplex connectors. NEMA National Electrical Manufacturers Association. National Instruments. NI-488.2 or The National Instruments industry-standard software for controlling NI-488.2M GPIB instruments. NI-DAQ The National Instruments industry-standard software for data acquisition instruments. Peripheral Component Interconnect—A high-performance expansion bus architecture originally developed by Intel to replace ISA and EISA.
Page 121 The MXI-Express x1 board of a cabled pair of boards that is farther from the CPU. trigger Either TTL or ECL lines used for intermodule communication. Transistor-Transistor Logic. Universal Serial Bus—A serial bus for connecting computers to keyboards, printers, and other peripheral devices. © National Instruments Corporation | G-7...
Page 122 Glossary Volts. VISA Virtual Instrument Software Architecture. This is the general name given to VISA and its associated architecture. Peak-to-peak voltage. Watts. A PCI Express link or port with one physical lane. G-8 | ni.com...
Page 123: Index
3-8 PCIe-8361 (191376x-02), B-5 configuration, 3-12 PCIe-8361 (195315x-01L), B-3 ExpressCard-8360 host card, 3-5 PCIe-8362, A-11 hardware, 3-1 PCIe-8362 (191376x-01), B-8 low-profile bracket, 3-3, D-1 PCIe-8363, A-13 PCI-8361, 3-1 PXI-8360, A-19 PCI-8366, 3-1 PXI-8361, B-12 © National Instruments | I-1...
Page 124 PXIe-8364, 3-6 (figure), 1-13 software, 3-12 operating environment specs larger MXI-Express x1 systems, 1-12 ExpressCard-8360, A-39 ExpressCard-8360 (192290x-01), B-20 indicators, 3-9 PCI-8361, A-2 locations, 3-10, 3-11 PCI-8366, A-6 status descriptions, 3-10 PCIe-8361, A-8 PCIe-8361 (191376x-02), B-5 PCIe-8361 (195315x-01L), B-3 PCIe-8362, A-11...
Page 125 ExpressCard-8360, A-38 weight specs, B-5 ExpressCard-8360 (192290x-01), B-20 PCIe-8361 (195315x-01L) PCI-8361, A-2 compatibility, B-2 PCI-8366, A-5 dimensions, B-2 PCIe-8361, A-8, A-13 maximum cable length, B-2 PCIe-8361 (191376x-02), B-5 operating environment specs, B-3 PCIe-8361 (195315x-01L), B-2 © National Instruments | I-3...
Page 126 Index PCIe-8362, A-11 operating environment specs, A-22 PCIe-8362 (191376x-01), B-8 power requirements, A-21 PCIe-8363, A-13 random vibration specs, A-23 PXI-8360, A-18 safety/compliance specs, A-23 PXI-8361, B-12 shock and vibration specs, A-22 PXI-8364, A-21 slot requirements, A-21 PXI-8366, B-17 storage environment specs, A-22 PXI-8367, A-26 weight specs, A-21 PXI-8368, A-29...
Page 127 PXI-8366, B-16 PXI-8367, A-25 PXI-8368, A-28 random vibration specs PXIe-8360, A-32 PXI-8360, A-19 PXIe-8364, A-35 PXI-8361, B-13 physical characteristics PXI-8364, A-23 PCIe-8363, A-13 PXI-8366, B-18 power requirements PXI-8367, A-27 ExpressCard-8360, A-38 PXI-8368, A-30 PXIe-8360, A-33 © National Instruments | I-5...
Page 128 Index ExpressCard-8360 (192290x-01), B-20 PCI-8361, A-2 PCI-8366, A-5 PCIe-8361, A-8, A-13 PCIe-8361 (191376x-02), B-5 PCIe-8361 (195315x-01L), B-2 PCIe-8362, A-11 PCIe-8362 (191376x-01), B-8 PCIe-8363, A-13 PXI-8360, A-18 PXI-8361, B-12 PXI-8364, A-21 PXI-8366, B-17 PXI-8367, A-26 PXI-8368, A-29 PXIe-8360, A-32 PXIe-8364, A-35...

This manual is also suitable for:

Mxi-express x1 series Pxi-8360 Pxi-8368 Pci-8366 Pxi-8361 Pxie-8360 ... Show all

National Instruments PCI-8361 User Manual

Appendix A Specifications

Appendix C Common Questions

Quick Links

Need help?

Questions and answers

Related Manuals for National Instruments PCI-8361

Summary of Contents for National Instruments PCI-8361

This manual is also suitable for:

Table of Contents