Huawei PDU8000 Quick Manual page 5

3. Secure the PDC.
Scenario 1
Scenario 2
(Optional) When the PDC installation environment is 5# channel steel and that the PDC cannot
be secured using the mounting holes, secure the PDC using the mechanical part shown in the
following figure.
2.3
(Optional) Combining Cabinets
1. Open the front and rear
doors. Wrench the anchor
bolts using an adjustable
wrench to adjust the cabinet
height.
2. Remove the cabinet
connecting kits from the rack.
3. Screw the connecting kits in
the connection positions on
the front door.
4. Use the same method to
secure the connecting kit in
the connection positions on
the rear door.
5. Repeat the preceding steps to
combine other PDCs.
6. Use a torque socket wrench
to tighten the bolts in
diagonal order.
When combining cabinets, ensure that all cabinet
surfaces are at the same level.
5