Huawei PDU8000 Quick Manual page 12

5. After the MDU screen starts, log in to the system as the admin or operator user (the
preset password is 000001 for both types of users), and perform the following operations
by referring to the figures:
• If this is the initial startup, set the language, time, date, network parameters, and system
parameters by using the Setting Wizard.
• If this is not the initial startup and these parameters have been set before, the system uses
the existing settings by default.
6. After the quick settings are complete, if the monitoring page displays alarms, clear the
alarms.
For system security purposes, change the preset password upon first login.
7. Turn on the PDC input switches.
8. Switch on the output circuit breakers except reserved circuit breakers in the PDC in sequence
to power on the corresponding devices and check whether the monitoring parameters on
the MDU screen are correct.
9. (Optional) Power off the PDC.
① Turn off the output circuit breakers in the PDC.
② Turn off the input circuit breakers in the PDC.
③ Turn off the input power circuit breaker of the PDC.
The figures are for reference only.
The actual parameter values prevail.
12