Passage Mode; Access Methods - Philips EasyKey 6000 Series User Manual

Press [8] to delete a key tag. The indicator
will flash in green once after [8] is pressed,
indicating that the lock can perform in
settings.
Place the key tag on the card reader, after
you hear a voice prompt, the indicator
will flash in green twice, indicating that
the deletion is done.
Press [*] twice, and enter the master PIN
code, then press [#] to confirm.
Press [9] to enter into passage mode
settings. The indicator will flash in green
once after [9] is pressed, indicating that
the lock can perform in settings.
1 2
or
Press [1] to enable passage mode, so
anyone can press down the handle to
unlock the door.
Press [2] to disable passage mode, when
the mode is disabled, only the enrolled
access methods can use to unlock the
door.
Once the operation is done, the indicator
will flash in green twice with a voice
prompt.
Attention
After the passage mode is activated, press [8]
for 3s can temporarily turn off the passage
mode. When the next user uses any enrolled
access methods to unlock the door, the
passage mode will be restored. If you want
to disable the passage mode permanently,
please go to settings; if the passage mode is
not needed, please disable it in time.

Access methods

Press [*] twice, and enter the master PIN
code, then press [#] to confirm.
Press [0] to enter access method settings.
The indicator will flash in green once after
[0] is pressed, indicating that the lock can
perform in settings.
1
2
or
Press [1] to go to single-method unlock,
the user can use any enrolled access
method among PIN code, key tag, and
fingerprint to open the door.
Press [2] to go to dual verification mode,
the user can use any two enrolled access
methods from PIN code, key tag, and
fingerprint to open the door.
After the setting, the indicator will flash
in green twice with a voice prompt.
Attention
Fingerprint unlock is optional. In dual
verification mode, if the product has
fingerprint unlock function , any two
enrolled access methods among PIN code,
key tag, and fingerprint can unlock the door;
if the product has no fingerprint unlock
function, you can only use PIN code and key
tag to unlock the door.
13