Lock Mode - Philips EasyKey 1000 Series User Manual

Lock mode

General mode
After adding fingerprints to the lock,
the lock will enter the general mode,
where the door requires a fingerprint
to unlock after being locked. When a
fingerprint is successfully verified, the
motor will activate the clutch to unlock
the door. After 5 seconds, the lock will
automatically engage (the clutch will
disengage), making it impossible to
unlock using the handle.
Passage mode
Enable passage mode
Press the setting button located
1
in the interior unit. The buzzer emits
a "beep" sound, and the blue light
remains steady, indicating that you are
entering the setting mode.
AAA
AAA
LED in blue and
sound
12
AAA
AAA
Click
emits a long "beep"
Re-clicking the setting button will
2
cause the green light to flash twice, and
the buzzer will emit two "beep" sounds,
indicating that the passage mode is
activated.
AAA
AAA
Re-click
LED flashes green
a long "beep" sound
Disable passage mode
When the passage mode is enabled,
1
clicking the setting button located
in the interior unit will emit a "beep"
sound from the buzzer, and the blue
light will remain steady, indicating that
you are entering the setting mode.
To disable the passage mode, click the
setting button again. The green light
will flash twice, and the buzzer will emit
two "beep" sounds.
In the passage mode, any
2
registered fingerprint verification will
automatically disable the passage
mode.
AAA
AAA
twice and emits