Using The Self-Propel Drive; Stopping The Engine; Disengaging The Blade - Toro 250000001 Operator's Manual

Using the Self-propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the mower will automatically keep pace
with you.
Note: You can self-propel the mower with the blade
engaged or disengaged.

Stopping the Engine

Push the ignition
toggle switch to the
Stop position.
10
Engaging the Blade
When you start your engine, the blade does not turn.
You must engage the blade to mow.
1. Pull the control
bar lock back.
2. Pull the blade
control bar (A) to
the handle.
m-8209
3. Hold the blade
control bar against
the handle.
m-8156

Disengaging the Blade

Release the blade control bar.
m-8203
Important: When you release the blade control bar,
the blade should stop within 3 seconds. If it does not
stop properly, stop using your mower immediately and
contact an Authorized Service Dealer.
3352-856 Rev B
m-8200
A
m-5578
m-5582
m-5582