Table of Contents
Advertisement
Date: 2021-01-13
Version: 1.2
Activity
Operating the plant
Perform maintenance and repair work and tooling
Table 2: Personnel and their activities
1.3
Legal Notice / Liability
The manufacturer assumes warranty and liability claims only under the conditions specified in
the contract and in compliance with the warranty periods.
The warranty expires:
• In the event of errors and damages that can be attributed to the fact that instructions in the
manual have not been observed,
• In the event of complaints that can be attributed to the fact that others then the original
parts specified in the documentation were used when replacing components,
• When changing the module (function, operating parameters) disregarding the conditions
specified in the order and without prior consent of the manufacturer.
The content of the technical documentation has been prepared with the utmost care. However
no liability is assumed for possible errors or incompleteness. This also applies to the content
of the technical documentation of all sub-contractors.
The documentation contains information that is protected by copyright. All rights reserved. This
documentation may not be reproduced without the expressed written permission of the manu-
facturer. It may not be electronically or mechanically reproduced, distributed, modified, surren-
dered to third parties, translated or otherwise used - not even excerpts.
Technical changes and errors are not impossible.
1.4
Co-Applicable Documents
These instructions refer to drawings and parts lists of the
Assembly:
For further information on the scope of validity of this manual and the modules de-
scribed, see section "Scope".
© 2021 ABB Automation GmbH |
Overhaul instructions
Central lubrication unit
General information
ZSD 2020
DOCUMENTS REFERENCE
Briefed
personnel
X
Page 7 of 50
Trained
personnel
X
X
en
Advertisement
Table of Contents
