Table of Contents
Advertisement
Date: 2021-01-13
Version: 1.2
1.8
Safety Measures
When working within the machine, the following protective equipment must be provide:
Always wear protective clothing and safety shoes according to accident
prevention and industrial safety regulations.
If necessary, use protective gloves or disposable gloves when working
on the material and hydraulic system.
When working on the material, compressed air and hydraulic system al-
so wear protective goggles.
When working within the machine wearing a head protection (protection
against bumping) is required.
Check your protective clothing before each use!
1.9
Position numbers
The position numbers are specified in this document as follows:
to the technical drawings, which are indicated in the corresponding section.
The position number in the headings is indicated by (item XX).
© 2021 ABB Automation GmbH |
Overhaul instructions
Central lubrication unit
General information
NOTE
Page 12 of 50
(Position
number). These relate
en
Advertisement
Table of Contents
