Advertisement
of toxic fumes.
Keep unauthorised persons at a safe distance from the work area. Persons within the work area are subject to the same dangers as
the person welding and must take the same precautions.
DO NOT weld on pressurised containers.
Remove ties, watches, rings and other jewellery and contain long hair.
DO NOT use the welder for any purpose other than that for which it is designed.
DO NOT use the welder in damp or wet locations.
DO NOT stand welder on a metal workbench, car bodywork or similar object.
DO NOT touch any live metal parts or the electrode while the machine is switched on.
DO NOT weld without a welding safety head shield, gauntlets and appropriate protective clothing.
DANGER! DO NOT weld near inflammable materials - solids, liquids, or gases.
DO NOT operate welder while under the influence of drugs, alcohol, other medication, or if you are tired.
DO NOT operate the welder if it or the cables are damaged.
DO NOT allow untrained persons to operate the welder.
DO NOT pull welder by the cable, or electrode holder. DO NOT bend or strain cables, protect from sharp or abrasive items. DO NOT
stand on cables or leads. Protect from heat. long lengths of slack must be gathered and neatly coiled. DO NOT place cables where
they endanger others.
DO NOT touch the electrode holder or workpiece immediately after welding as they will be very hot. Allow to cool.
DO NOT open the cover of the machine. Switch off machine and remove the plug from the power supply after use.
The electromagnetic fields generated by the welding process may interfere with the operation of electrical and electronic equipment.
Users of vital electrical or electronic devices (e.g.pace-makers, respirators etc.) should consult a doctor before entering areas where
welding machines are in use.(see Section 8).
Users of vital electrical or electronic devices should not use any welding machine.
2. INTRODUCTION
Manufactured to rigorous high standards these models meet all relevant Ce requirements. Fitted with forced air cooling system, these welders
have increased duty cycle and performance. All models feature a double vented, wraparound shell fitted to a heavy-duty chassis. Screw type,
stepless welding control allows fine adjustment of current. each welder is fitted with carry handle. Models supplied with accessory kit including
electrode holder, earth clamp and chipping hammer/wire brush.
This instruction manual contains the information required to prepare your arc welding set for welding. The instructions are not intended to
show you how to become a welder. If you have no experience, we recommend that you seek training from an expert source. Arc welding is
relatively easy to perform, but does require a steady hand and time practising with scrap metal, as it is only with continued practice that you
will achieve the desired results.
3.
SPECIFICATIONS
Model No: .............................................................140XT
Welding Current:................................................45-140A
electrode Capacity: .................................... Ø1.6-3.2mm
Cooling: ..........................................................Forced Air
Output Cable: ....................................................... 10mm
No load Voltage: ......................................................48V
Power Input: ................................................. 230V - 1ph
Weight: ................................................................... 17kg
4. FEATURES
Model No: .............................................................160XT
Welding Current: ................................................ 55-160A
electrode Capacity: .................................... Ø2.0-4.0mm
Cooling: ...........................................................Forced Air
Output Cable: ....................................................... 10mm
No load Voltage: ...................................................... 50V
Power Input: ..................................................230V - 1ph
Weight: .....................................................................18kg
Original Language Version
Fig.1
140XT, 160XT
Issue: 2 - 10/02/10
Advertisement
