Firmware Upgrade; Notice - Viofo A119 MINI 2 User Manual

Voice Command: Voice recognition commands. You
can issue different voice commands to remote control
the camera, including:
- Take Photo
- Video Start
- Video Stop
- Turn On Audio
- Turn Off Audio
Beep Sound: Turn all notification sounds ON/OFF.
Frequency: Frequency adjustment setting to minimize
flickering and banding in recorded video.
Image Rotation: Turn the screen upside down.
Image Mirror: Reverse the image from left to right.
Format: The operation will delete all data on the Micro SD
card.
Note:
Once you format the Micro SD card, all information
will be deleted and cannot be restored. Make sure you
back up all important files before proceeding.
Format Warning: Set the number of days between format
warnings.
Default Setting: Restore camera to factory defaults.
Car Number: Imprint a customized set of 11 digits to
the recorded video. Useful to add license plates or
identifying features.
Custom Text Stamp: Imprint the customize text on the
recorded video.
Firmware Version: Current firmware version check.
- Turn On Screen
- Turn Off Screen
- Lock the Video
- Turn On WiFi
- Turn Off WiFi
26

Firmware Upgrade

Follow the instructions on this website to upgrade the firmware:
(https://viofo.com/content/42-help-and-support/)
Note:
• Before using a microSD card to upgrade the
firmware, formatting the card in the camera is
necessary to ensure stable read and write operation.
• Do not unplug or power off the camera during a
firmware upgrade, it may cause the camera to
subsequently fail to boot.

Notice

FCC Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
27