Buffer Modules; Sitop Buf1200 - Siemens SITOP Series Equipment Manual

Connections and terminal designations of the redundancy modules 6EP1962-2BA00 and
6EP1964-2BA00
① Input 24 V supply voltage from power supplies
1 and 2 "IN 24V-1", "IN 24V-2"
0 V connection to the internal supply "GND"
② Output 24 V supply voltage to the load "OUT
24 V"
floating relay contact "O.K."
Do not subject the end stop to higher loads
*1)
Figure 2-12
2.2.2

Buffer modules

2.2.2.1

SITOP BUF1200

Note
Use copper wire certified for at least 75 °C.
Connections and terminal designations
① 24 V DC supply voltage "+", "-"
SITOP expansion modules
Equipment Manual, 09.2022, A5E36605235-2-76
Terminal data 6EP1962-2BA00 and 6EP1964-2BA00
Description, device design, dimension drawing
2.2 Connections and terminal designation
Plug-in terminal each with a screw terminal
Plug-in terminal with one screw terminal (output)
and two screw terminals (relay contact)
1 spring-loaded terminal each
27