TeamPoS 3000 XT
5. Remove the heatsink and its retaining bracket which is on the back of the motherboard.
Remove the CPU by turning the retaining screw 1/2 turn counterclockwise.
6.
7. Install the new CPU and secure it by turning the retaining screw 1/2 turn clockwise.
8. Replace the heatsink and retaining bracket, fastening it with the four screws.
9. Connect the fan connector.
10. Replace the motherboard into the chassis.
11. If necessary, edit bios settings. Refer to section 9.4.
D900000172
Figure 7-6. CPU Heatsink and Retaining Bracket
Turn counterclockwise 1/2
turn to remove CPU
Figure 7-7. Removing the CPU
Installation and Maintenance Manual
CPU
7-9