NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
Remove the
computer
cover.
Procedure
1. Place the computer with the side-chassis facing up.
2. Lift and rotate the side-chassis away from the computer.
3. Press the securing clip and disconnect the power-supply unit cable (ATX2) from the system board.
4. Press the securing clip and disconnect the power-supply unit cable (ATX1) from the system board.
5. Note the power-supply unit cable routing and remove the power-supply unit cable from the routing guides on the chassis.
Removing the power-supply unit
computer. After working inside your computer, follow the instructions in
Removing the power-supply unit
32
After
51