NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
computer
cover.
2. Remove the
front
bezel.
3. Follow the procedure from step 1 to step 4 in
Procedure
1. Note the antenna-cable routing and remove the antenna cables from the routing guide inside the chassis.
2. Push down the antenna cables through the cable-routing slots on the side-chassis.
3. Rotate the side-chassis towards the computer until it snaps into place.
4. Note the antenna-cable routing and remove the antenna cables from the routing guides on the side-chassis.
5. Using a plastic scribe, gently pry the antenna modules off the side-chassis.
42
Removing the antenna modules
Removing the antenna modules
computer. After working inside your computer, follow the instructions in
"Removing the wireless
card".
26
After