Sealey AP6310BE.V2 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
i
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using these units.
‰
WARNING! Use the Rollcab on level and solid ground, preferably concrete.
‰
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the units clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
9
DO NOT use these units for any purpose other than that for which they are designed.
8
DO NOT use the units outdoors.
8
DO NOT place the units in a damp or wet location or an area where there is condensation.
8
DO NOT clean the units with any solvents which may damage the surfaces or the protective coating.
8
DO NOT move the units with the drawers out. To avoid tipping, open one drawer at a time and close and secure all drawers whilst
8
moving the rollcab.
DO NOT step on the drawers.
8
DO NOT overload the drawers, weight limit per drawer is 36kg.
8
2. INTRODUCTION
All heavy-duty steel construction and manufactured with steel inner walls for extra strength and durability. Heavy-duty 45mm ball
bearing drawer slides provide superior performance, suitable for heavier loads. Full height rear locking mechanism, locks smooth
running soft close drawers in place. Rust and solvent resistant black crinkle effect finish. Fitted with six Ø125mm PP wheels with
black chrome effect alloys, two castors with quick release anti-rotation toe locks and two fixed wheels. Each drawer features stylish
black anodized heavy-duty drawer pulls plus pre-cut non-slip liners. Power tool charging drawer fitted with 4 x 230V sockets & 2 x
5V 2.4A USB sockets. Mounting points to fit additional 4 gang power strip - Model No. EL34USBB (not included) Stainless steel 'flip-
top' split equally into two sections providing a work surface and additional storage. Two cylinder locks allow drawers and power tool
charging drawer to be locked separately.
3. SPECIFICATION
MODEL NO.: ....................................................... AP6310BE
Dimensions (W x D x H): .......................1600 x 585 x 990mm
4 Gang power rail (optional) ................................. EL34USBB
4. CONTENTS
Item Description
1 Bolt M6 x 16 mm
2 Handle fig.1
3 Storage hooks fig.2
4 Bolt M3 x 10 mm
(not shown)
5 Bottle opener fig.4
5. ASSEMBLY
5.1.
These units are heavy, obtain the help of at least one other
person before attempting to unpack them.
5.2. Mount the side mounted handle onto the left hand end of cabinet
and attach with 4 bolts (item 1) (fig.1).
5.3. Mount the storage hooks using bolts (item 1) at each end of the
cabinet (fig.2) or alternatively mount one set of hooks on reverse
face of either left or right hand end of cabinet (fig.2).
© Jack Sealey Limited
MOBILE TOOL CABINET 1600MM WITH
POWER TOOL CHARGING DRAWER
AP6310BE.V2
MODEL NO:
Quantity
14
1
4
4
1
Original Language Version
W
Unit element
Top long drawer (x1) 1036
Left small drawer (x3) 641
Left large drawer (x1) 641
Right small drawer (x4) 326
Right large drawer (x1) 326
AP6310BE.V2 Issue 1 15/12/21
D H
482 69
482 68
482 204
482 47
482 212
fig.1