Subroutine 48 - Servplan (Service Plan) - Siemens SINUMERIK 808D Operating Instructions Manual

3.21

Subroutine 48 - ServPlan (service plan)

Purpose
To use subroutine 48, you must have created a service plan on the SINUMERIK 808D.
When the pre-alarm time arrives, the machine outputs a notification message. When the final
alarm time arrives, the machine outputs an alarm message.
Note
To perform a service plan on the PLC, you need to download DB9903(SP_INI) and
DB9904(SP_ACT).
Local variable definition
Table 3- 19
Name
Deact0
AckMsg0
Table 3- 20
Name
HintMsg0
Alarm0
Assigned global variables
ServPlan_msg0
ServPlan_alm0
Relevant PLC machine data
None
Example for calling subroutine 48
PLC Subroutines Manual
Operating Instructions, 12/2012, 6FC5397-2EP10-0BA0
Inputs
Type
BOOL
BOOL
Outputs
Type
BOOL
BOOL
BOOL
BOOL
Descriptions of the PLC subroutines
3.21 Subroutine 48 - ServPlan (service plan)
Description
Freezing a service plan
Confirming the notification message of a service plan
Description
Notification message
Alarm message
Notification message of the first service plan
Alarm message of the first service plan
55