Precautions For Filter - Panasonic YC-400TX Manual

12. Precautions for filter

By means of setting the attached filter to the water inlet on the rear side of the welding machine, you can
prevent the inside of the water flow switch and the water conduct of torch from accumulating dust or fur. Please
fix the filter in the following way.
12.1 The way of setting the filter.
Put the filter in the adapter and setting it to the water inlet on the rear side of the welding machine.
②set the water hose to the adapter
12.2 Maintenance for filter
When the water conduct comes to be used for a long time and dust or fur is accumulated in the filter, there
might be the case the 'Warning Lamp' turns on and the machine stops. Therefore, clean the filter once or twice
per month
※ The way of cleaning
①Remove the adapter
② Take out the filter,
③Remove dust or fur accumulated on the wire net of the filter by washing or brushing.
④Set the filter.
19