JVC RM-LP5G User Manual page 6

and then press the preset number to be cleared.
>When the menu selection is in 10 presets Mode. the [RESET] Button is changed
to a presets expansion compound key, which is used to set and call 6-10 preset
positions.
[RESET]+]CAM1-5]TO Setting or Call 6-10 Presets.
Set Presets 6-10
Press the [RESET] key, at the same time of the number keys [1-5] and [CAM1-CAM5] will
light up in green at the same time, and the camera channel keys [CAM1-CAM5] will be
changed to number keys 6-10 Presets, the user can Set 6-10 Presets
Long press[CAM1], when "Set Preset 6" is displayed on the screen, means that No. 6
Preset has been saved;
Call Presets 6-10
Press the [RESET] key, at the same time of the number keys [1-5] and [CAM1-CAM5]will
light up in green at the same time, the camera channel key [CAM1-CAM5] will be
changed to the number keys 6-10 Presets, the user can call 6-10 Presets
Press【CAM1】, when "Show Preset 6" is displayed on the screen, means that the No. 6
Presets is being called;
*Note: When 10 Presets Mode is selected, All Presets cannot be clear ed through the
[RESET] Button and Only can be replaced by New Presets.
⑬ FOCUS Knob
This Knobs is for adjusting the camera's focal length. When using this
function, the keyboard's Focus mode will be changed to Manual.
⑭ Function Key Zone
[Menu Key]
●
This key is to Turn ON/OFF Camera Menu, Long Pressing for 3 seconds will
turn on the Keyboard system Menu.
[AE MODE Key]
●
This key is used to change the automatic exposure mode of the camera.
Each time it is pressed, the camera changes to a different exposure mode.
The specific functions are shown in Table 1:
- 5 -