Table of Contents
Advertisement
System Menu Operation Instructions
[ Factory default Setting ]
●
To restore to Factory default settings.
[ About Keyboard ]
●
To review the relevant information of the keyboard, including: keyboard model,
Firmware version, factory S/N and other information.
COMM SETTING
To move the cursor to[ Comm Setting ], then
Movement right to enter Comm Setting:
[ Channel ]
●
The available channels CAM1~5 corresponds to the buttons [CAM1]~[CAM5].
[ Address ]
●
To set the serial communication address of the corresponding channel.
If the current communication protocol is VISCA, the communication address can
be selected from 1~7. If the current communication protocol is PELCO-D/P,
The communication address can be selected from 1~255.
[ Baud Rate ]
●
To set the serial communication Baud Rate of the corresponding channel.
Available in: 2400, 4800, 9600, 19200, 38400bps.
[ Protocol ]
●
To set the Serial communication Protocol of the corresponding channel
( Including Serial Communication Protocol and Internet Communication Protocol).
Available in: VISCA, PELCO P/D, UDP.
[ Camera Brand ]
●
Due to the differences in the AE/WB parameter values corresponding to
different brands of cameras, the actual function of the knob may vary.
Before using, please set the camera brand of the corresponding channel, you
can choose: JVC, PUAS, SONY, VHD, Minrray, Bolin...
ETHERNET SETTING
Move the cursor to [ Ethernet Setting ], then
move right to enter Ethernet Settings:
[ Channel ]
●
The available channels CAM1~5 correspond to the buttons [CAM1]~[CAM5].
[ Port ]
●
To set the UDP Port of the corresponding channel.
1. Channel:
2. Address:
3. Baud Rate:
4. Protocol:
5. Camera Brand:
1. Channel：
2. Cam IP：
3. Port：
- 13 -
CAM1
1
9600
VISCA
SONY
CAM1
192.168.000.010
52381
Advertisement
Table of Contents
