Table of Contents
Advertisement
Description of Button & Knob Functions
[OPT key] is used to trigger single focus of the camera. At the same time, the
camera enters the one-shot auto focus mode.
⑨ PTZ Speed Adjustment Knob
This knob is used to adjust the speed of Camera Pan, Tilt and Zoom.
The Current Speed will be displayed on the Led Display. The Value is lower
when the pan/tilt rotation speed or zoom speed of the camera Slower.
⑩ 2-Axis Joystick
The joystick supports camera Up/Down, Left and Right movements.
When the camera or keyboard menu is opened, the joystick is used to
control the menu cursor Up/Down,Left/Right and modify parameters.
⑪ Channel Button Zone
[ CAM1 ] to [ CAM5 ] are shortcut keys for camera channels. When you
select any camera channel, the back-light of the corresponding camera
channel will be illuminated in green, and all the parameters and settings of
the keyboard will be changed to the current Channel.
Note: The communication parameters (address ID, protocol, baud rate, IP address,
port number, etc.) of each channel can be set individually. Mixed use of multiple
protocols through different channel is supported.
⑫ Presets Function Zone
[ Number Keys ]
●
SETTING PRESETS :
Long Press and hold the number key for 2 seconds (such as [Number key
1], when the screen displays "Set Preset 1"preset 1 has been saved)
CALL PRESETS :
Short press the preset number to recall Presets, (for example, [Number key
1], when you press the [Number key 1]the screen displays "Show Preset 1",
this means that preset 1 has been recalled).
[RESET]
●
It is used to clear presets.
>When the System Menu selection is
5 presets Mode
in
Press[RESET]+[Number keys]to clear the presets setting.
Clear the preset: After pressing the [RESET ] Button, the green backlight starts to flash,
- 4 -
Advertisement
Table of Contents
