Thread Locking Adhesive Agent - Hitachi 6HK1 Workshop Manual

14A-8 Service Information Guide (All models)
1. Using the thread locking adhesive agent
Type
Loctite 242
Loctite 262
Loctite 271
Caution：
・ Remove grime, fluid, oil, and grease off
thoroughly from the bolts, bolt holes, and
screw thread section of nuts to which thread
locking adhesive agent will be applied.
Note：
・ Check if the cleaned sections are dry.
Caution：
・ After tightening, do not apply excessive torque
or vibrations for at least an hour until the
thread locking adhesive agent hardens.
Apply thread locking adhesive agent to the end 1/3 of the
screw and tighten at the specified torque.

Thread locking adhesive agent

Color
Blue
Red
Red